Dubaco DS-800, Руководство пользователя

Страница: 21 / 56

This configuration enables to set the duration of vibrating time when the
barcode is successfully read and decoded. ( Note: this configuration is
only applicable with optional purchased vibrator installed, and
Good read Vibrator function set as “Enable” Chapter: 7-3-3 )
(1) Enter
(3) Scan parameters from Hexadecimal /
Decimal table
(Range:0~250 = 0~2.5sec)
(2) Vibrator OFF Delay barcode
(4) OK
(5) End
Vibrator OFF Delay
Double Confirm
This option enables the scanner to double confirm the barcode data, if
this option is enabled, the scanner will require more times to verify the
barcode data. This setting will related to the double confirm count
configuration, the more confirm counts will inhibit miss-reading
barcodes.
(1) Enter
(2) Enable
(3) *Disable
(5) End
37 38