TOP RACK
ONLY
40 C
Cycle
TOP RACK
ONLY
40 C
Cycle
TOP RACK
ONLY
40 C
Cycle
9
8
ASSEMBLING
CAUTION: NEvER USE THE BLENDER WITHOUT THE BLADES AND LID
CORRECTLY IN PLACE. NEvER RUN THE BLENDER EmPTY.
Add your ingredients to the
jar. Cut large items in to
evenly sized 2cm chunks.
Do not fill above 2.0L. For
ice, warm or solid items do
not fill above 0.75L - 1L.
Position the jar with blade
on the main body. It can be
located in 8 positions. If not
correctly positioned the
function lights on the control
panel will not illuminate.
Attach the lid by pushing
down while applying a slight
twisting action.
Place your hand on the lid to
hold the blender steady. Use a
heat proof gloved hand when
blending hot items.
2
1
3
3
TO STOP
To stop blending, press the
stop button at any time, this
will be illuminated red. Always
turn main power off & unplug
after each use.
STARTING & STOPPING
NOTE: TO PREvENT OvER PROCESSING THE BLENDER WILL AUTOmATICALLY
STOP AFTER 1 AND A HALF mINUTES. ALL OF THE LIGHTS WILL FLASH 3 TImES.
THE LID
ADD INGREDIENTS
2
1
MAIN POWER
TO START
Plug in the blender then
press the main on/off button.
All the lights will illuminate
solid if the jar is in place and
the blender is ready to go.
To start blending, press one
of the blending cycles as
described on the next pages.
Only the button selected will
illuminate.
TOP RACK
ONLY
40 C
Cycle
TOP RACK
ONLY
40 C
Cycle
SETTING UP
DO NOT LET CORD HANG OvER EDGE OF TABLE OR COUNTERTOP
AND POSITION AWAY FORm THE EDGE
Rinse and dry the jar, lid and
blades before every use.
TOP RACK
ONLY
40 C
Cycle
Unwind the required length
of cord. It is important to
keep the cord short. Wrap
the excess cord length
round the cord tidy.
Place the blender on a level
surface and push down so
the sucker feet stick to the
surface.
2
1
3
CORD TIDY
3
REMOvING BLADE
To remove the blades use
the tool provided. Insert and
rotate the blades
CLOCKWISE TO
LOOSEN.
Continue to
unscrew and lift to remove.
REMOvABLE BLADES
CAUTION: THE BLADES ARE vERY SHARP! ENSURE THE GASKET IS IN
PLACE BEFORE USING.
SECURE TO SURFACE
RINSE AND DRY
TOP RACK
ONLY
40 C
Cycle
2
1
THE GASKET
LOCKING BLADE
Ensure the gasket is seated
on the collar of the blade
correctly before inserting
into the jar. It can be placed
on either way round.
Align the blade assembly to
base of the jar. Using your
fingers,
ROTATE
ANTI-CLOCKWISE TO
TIGHTEN
then use the
tool to lock in to place.
THE jAR