10
11
8
9
Plug in the Power Cord at
the mains.
Turn the Control Dial to the
function that you wish to use.
The Power Indicator Light will
illuminate. (see table below).
7
Place the Lid into position.
Caution: Failure to
locate lid will prevent
sterilisation. Risk of
bacterial and viral
contamination.
FUNCTION
DESCRIPTION
TIME
Sterilise and
Quick Dry
Sterilise and dry up to 6 bottles in 30 minutes. This function
kills 99.9% of bacteria. Ideal for immediate use. Items may not
be completely dry.
Note: This function requires 90ml of water; more
than 90ml of water will prolong the sterilisation cycle
time, reducing the drying time. Less than 90ml may
not sterilise items properly. If you leave the lid on
your Steriliser, item will remain sterile for 24 hours.
30 minutes
Sterilise and
Dry
Sterilise and dry up to 6 bottles in 60 minutes. This function
kills 99.9% of bacteria. Items will be completely dry and ready
to use or store for later use.
Note: This function requires 90ml of water; more
than 90ml of water will prolong the sterilisation cycle
time, reducing the drying time. Less than 90ml may
not sterilise items properly. If you leave the lid on
your Steriliser, item will remain sterile for 24 hours.
60 minutes
Dry Only
Dry up to 6 bottles in 30 minutes by ensuring the water recess
is empty and turning the control dial to Sterilize and Quick
Dry. Without water this function will dry items that have been
sterilised only and are still wet, or dry any items that require a
longer drying cycle.
30 minutes
FUNCTION
DESCRIPTION
TIME
Sterilise Only
Sterilise up to 6 full bottles. This function kills 99.9% of
bacteria.
Note: This function requires 90ml of
water; more than 90ml of water will prolong the
sterilisation cycle time, less than 90ml may not
sterilise items properly. If you leave the lid on your
Steriliser, item will remain sterile for 24 hours.
15 minutes
5
6
Put the Upper Rack into
position on top of the
Lower Rack.
Place the bottle teats,
collars and accessories on
the Upper Rack. Ensure
teats face upwards, so that
they do not collect water /
condensation.
When the cycle has finished, the
Control Dial will be in the ‘O’
position and the Power Indicator
Light will NOT be illuminated.
If
light remains illuminated after
use immediately isolate the
Steriliser & call service centre.
Unplug the Steriliser from
the mains.
Caution: After the
Power Indicator Light
has gone out wait 5
minutes before opening
the lid. Caution: The
Steriliser will be hot.
10
11
Wash hands for 20 seconds with soap. Remove the milk
bottles and other items carefully from the Upper and Lower
Racks.
Caution: The sterilised items may still be hot.
We recommend that you use tongs to handle the
sterilised items.
12
Warning: Allow
10 minutes before
starting another cycle.
Warning: Do not place items in the Water
Recess or on the Element; risk of fire. Only place
items to be sterilised on the racks provided.
