5
•
Never operate the processor with the bowls empty.
•
Do not misuse the processor; it is designed for use
with food items only
•
Before each use, check that the bowls contain only
the ingredients and nothing else
•
Do not process boiling or hot liquids
•
Bowls and attachments are not suitable for
microwave use
•
Ensure the bowl(s), accessory(s), lid and food
pusher are all securely in place before turning the
processor on. It will not work without the large bowl
and lid in place and locked
•
Only use the food pusher supplied to insert and push
ingredients down the feeder tube. Never use your
fingers or utensils; this could cause severe injury and
also damage the appliance
•
Do not overfill the bowls; ingredients need room to
move around. Use the maximum loading chart on
page 11 for reference
•
Always turn the power off via the control knob
before opening the lid
•
Switch off the appliance before changing accessories
or approaching moving parts while in use
•
Never remove the bowl or lid until the blades or
discs have come to a complete stop
•
Never touch moving parts or insert your hand or
utensils into the bowl. Use the food pusher provided
to guide ingredients through the feed tube
•
The processor features an overheat cut-out that cuts
the power if it becomes too hot for any reason. If
this occurs turn the control knob to the off
position. Once it cools down, the safety cut-out will
automatically reset itself within 1 hour and the
power will be restored
•
Do not submerge the motor housing, cord or plug in
water or any other liquids
•
Clean all parts after each use; please refer to the
cleaning instructions on page 21
•
If your ingredients include raw meat, make sure the
bowls and attachments are cleaned thoroughly,
immediately after use
•
When using a dishwasher, always set it to the lowest
setting (max 40ºC) and keep bowls and accessories
well away from the heating elements. Avoid the
drying cycle.
SAVE THESE INSTRUCTIONS
SAFETY PRECAUTIONS
2007.07.24_Food processor manual.qxp 25/07/2007 09:11 Page 5
