5
Faceplate Removal
Semi-Permanent
Faceplate Installation
Power On/Off
Mode
Auxiliary Input
Volume
Programmable
Turn-On Volume
Mute
Preset EQ Curves
Reset
Display
General Operation
XHD6420
OPERATION
Press
RELEASE
and pull away from the left side to remove.
To re-install, insert right side of faceplate first then push
left side to secure.
Remove trim ring and install supplied #1 x 7/” Phillips
head screw through left side of mounting frame into faceplate.
Press
POWER
or any other button (except eject) to turn the
unit on. Inserting a disc will turn the unit on automatically.
Press
POWER
to turn the unit off.
Press
MODE
to select between AM/FM, CD player and
auxiliary input. Modes of operation are indicated in the
display.
NOTE
: CD mode will not appear unless a CD is inserted.
Insert .5 mm plug to connect your portable audio device.
Adjust volume using rotary encoder (00-46).
Press and hold
POWER
for seconds to program currently
selected volume level. "P-VOL" and the current volume level
will momentarily appear in the display.
Press
MUTE
to silence the audio. “MUTE” will flash in the
display. Press
MUTE
again to cancel.
Press
EQ
to select between POP, JAZZ, CLASSIC, BEAT,
ROCK and OFF (default) equalization curves. Any adjustment
to the Bass or Treble settings automatically cancels the
current EQ curve (if one is selected).
Press to
RESET
the unit upon initial installation or if
abnormal operation occurs. The reset button is located
behind the faceplate.
Press
DISP
to select between clock and different types
of information, such as radio frequency, HD Radio song
information, CD track/elapsed time or MP/WMA song
information.
