23
AMB500W
OPERATION
Bluetooth
®
Operation
Making a Phone Call
• Press
once. "ENTERNUM" will be shown, then
an "_" will appear on the display.
• Using the remote control, enter the phone number using
the 0-9 buttons. Press
on the remote control or
AMB500W front panel to begin dialing.
Placing a phone call from your cell phone will also use the
Bluetooth function of the AMB500W.
• Press
SELECT
from Bluetooth mode to view the 10 most
recent phone calls that were dialed, received or missed
while connected to the AMB500W.
• Turn the
volume knob
to cycle through the recent phone
numbers. Press
SELECT
or
to dial the phone
number.
To redial the last phone number, press
three times
from Bluetooth mode. Dialing will begin automatically.
Manual Dialing
using IR remote control
Placing a call from the
phone
Recent Calls List
Redialing last number
Receiving and Ending Phone Calls
Incoming phone calls will automatically appear on the
display and a ring tone will be heard.
Note
: The volume of the ring tone depends on the volume
level of the AMB500W. The incoming ring tone may not
be heard if the volume is set to a low level or mute is
activated.
•
Press
to receive the incoming phone call.
• Press and hold
for 3 seconds to refuse the incoming
phone call.
Note
: If
Auto Answer
is set to
ON
in the setup menu, all
phone calls will be received automatically after a few
rings.
During an active phone call, press
to end a phone call.
If the phone call was received when listening to music in
another mode, the AMB500W will resume the previous
mode.
Receiving a Phone Call
Ending a Phone Call
Содержание AMB500W
Страница 1: ...INSTALLATION OWNER S MANUAL Marine Receiver with Detachable Face AMB500W ...
Страница 29: ...29 AMB500W OPERATION Notes ...
Страница 30: ...30 AMB500W OPERATION Notes ...
Страница 31: ...31 AMB500W OPERATION Notes ...
