2
Preparation
AMB500W
INSTALLATION
Mounting Sleeve
Vessel Dash Panel or Splashguard
Please read entire manual before installation.
Before You Start
• Disconnect negative battery terminal. Consult a qualified technician for instructions.
• Avoid installing the unit where it would be subject to high temperatures, such as from
direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
Getting Started
• Remove trim ring and mounting sleeve from the unit.
• Install mounting sleeve into opening, bending tabs to secure.
• Connect wiring harness and antenna. Consult a qualified technician if you are unsure.
• Certain vessels may require an installation kit and/or wiring harness adapter (sold
separately).
• Test for correct operation and slide into mounting sleeve to secure.
• Snap trim ring into place.
Mounting Sleeve
Mounting Tabs
Vessel Dash Panel or Splashguard
Mounting Sleeve
WM4000 Head Unit
Vessel Dash Panel or Splashguard
Step 1:
Insert the mounting sleeve into the
vessel's dash panel or installed
Step 2:
Bend multiple mounting tabs around
the mounting sleeve until the
mounting sleeve is secure
Step 3:
Connect all wiring harnesses and
slide the head unit into the mounting
sleeve until it clicks into place
Содержание AMB500W
Страница 1: ...INSTALLATION OWNER S MANUAL Marine Receiver with Detachable Face AMB500W ...
Страница 29: ...29 AMB500W OPERATION Notes ...
Страница 30: ...30 AMB500W OPERATION Notes ...
Страница 31: ...31 AMB500W OPERATION Notes ...