manualshive.com logo in svg

DTS XR2000 SPOT CMY, Руководство пользователя, Страница: 9 / 48

Поделиться
Скачать
DTS XR2000 SPOT CMY Скачать руководство пользователя страница 9

7- MOUNTING THE LAMPS

Warning: Switch off the unit before replacing the lamp.

1) Using a screwdriver, loose the 3 screws A, B, C, (photo 1) and remove the metal cover .

2) Insert the lamp (photo2). 
3)Rotate the lamp 1/4 turn clockwise (photo 3 and 4).
The lamp used on 

  is made in quartz glass and should be handled with care. Always 

follow the instructions supplied in the lamp's packaging. Never touch the glass directly but use the tissue 
provided in the lamp’s packaging. The 

 lamp socket is not symmetrical.

DO NOT USE UNDUE FORCE ON THE GLASS. In case of difficulty, read again the instructions and repeat 
the procedure.
4) Replace the metal cover and tighten the screws A,B,C, which were previously removed.
WARNING: Never look directly at the lamp when it’s lit. 
Discharge lamps emits UV rays; radiation from this lamp can cause damage to eyes and skin. 

7.1 Lamp alignment

Attention: we recommend to align the lamp in the optical system  to avoid overheating of the dichroic 
filters and other components inside the unit. The lamp alignment is also essential to obtain the 
maximum unifirmity and luminous performance by the projection. 

3 adjusters X, Y and 

Z (photo 5) 

 you will have an evenly projected light beam, with no shadows or 

zones wich are brighter than others.

Philips MSR Gold 700/2 Fastfit
Power 700W
Luminous flux 50,000 lm
Colour temperature 7.500°K
Lampbase PGJX50
Rated life 750  hours

XR2000 SPOT

PGJX50

1) Mount the fixture in an orientation so that it may be squarely projected onto a smooth white surface 
no less than 3 meters away. 2) Using a console or the menu system, focus an open (white) beam onto 
the surface and observe the beam. 3) Using a phillips-head screw driver, rotate the 

until you achieve a uniform flat field.

When the lamp is correctly optimized, 

Photo 2

Photo 1

Photo 4

Photo 3

Photo 5

9

Lamp

Alignment

UV

Normal

Hot Spot

XR2000 SPOT

Содержание XR2000 SPOT CMY

















































Отзывы:

Нет отзывов