DTS SMS-2K-1 Скачать руководство пользователя страница 12

 

SMS-2K-1 Digital Cinema Server Maintenance Manual 

Version 1.0

 

 

3 Maintenance Program 

Preventive maintenance tasks must be performed to ensure the proper function of the Digital 
Cinema Server throughout the years.  

Such tasks must be performed periodically according to the maintenance program presented in 
the table below: 
 

Part(s) 

involved 

Task 

Maintenance interval 

Qualification of 

personnel 

Duration 

HDD Filter  

- Clean (wash and dry) 
the HDD filter or replace it 
(if broken) by a new one 
provided by DTS Digital 
Cinema  

2,500 to 5,000 operating 
hours (~ 3 to 6 months), 
depending on how dusty 
the environment is 

Technician 

5 to 10 

minutes 

HDD Trays, 
CPU and fans 

- Dust removal in Hard 
Disk Drive Trays, CPU 
cooler and fans 

5,000 operating hours 

(~ 6 months) 

Technician 

15 to 20 

minutes 

Fans 

- Fans checking for 
rattling and noise 

5,000 operating hours 

(~ 6 months) 

Technician 

10 to 20 

minutes  

Fans Shock 
Mounts 

- Fan shock mounts 
status visual inspection 

5,000 operating hours 

(~ 6 months) 

Technician 10 

minutes

Fans (2U rear 
panel fans 
and Dolphin 
fan) 

- Recommended 
replacement of these 
three fans (based on 
information provided by 
the fans manufacturer) 

50,000 operating hours 

(~ 5 years) 

Technician 20 

minutes

Dolphin board 
battery (*) 

- Change the Dolphin 
board battery (*) 

50,000 operating hours 

(~ 5 years) 

Technician 10 

minutes

Note

: The durations provided above do not include the unit preparation time corresponding to 

paragraph 

5.1.1

. Such preparation is estimated at about 20 minutes. 

THE TECHNICIAN SHOULD BE ACCREDITED BY DTS DIGITAL CINEMA. The corresponding 
maintenance procedures are provided in section 

5

(*) MAKE SURE TO APPLY THE PROCEDURE PROVIDED IN SECTION 

5.2.2

 FOR A 

PROPER DOLPHIN BOARD BATTERY REPLACEMENT, OTHERWISE YOU MIGHT LOSE 
THE SECURITY CLOCK TIME AND THE UNIT WILL NO LONGER BE ABLE TO PLAY 
ENCRYPTED MATERIAL. IF THIS HAPPENS, THE UNIT MUST BE RETURNED TO DTS 
DIGITAL CINEMA. 

Recommendation

:  

DTS Digital Cinema recommends to keep proper and accurate records of each maintenance 
task performed (including at least date, operation(s) performed and technician name), in 
order NOT to miss a maintenance operation. DTS Digital Cinema is not responsible for 
maintenance tracking. 

 

11

 

Document #: 9301H29500V1.0 

 

 

 

Содержание SMS-2K-1
























Отзывы: