DTS EUPHONY 3, Руководство пользователя, Страница: 24 / 36

24
13- ERROR MESSAGES
ERROR SHOWN ON DISPLAY APPEARS WHEN
PAN -Pan motor fault
-Pan encoder fault
-Pan motor driver on Pan&Tilt PCB fault
-Wiring connection between Pan encoder and
Pan&Tilt PCB fault
PAN LOCKED -Pan locked
-Pan motor fault
-Pan encoder fault
-Pan motor driver on Pan&Tilt PCB fault
-Wiring connection between Pan encoder and
Pan&Tilt PCB fault
TILT
-Tilt motor fault
-Tilt encoder fault
-Tilt motor driver on Pan&Tilt PCB fault
-Wiring connection between Tilt encoder and
Pan&Tilt PCB fault
TILT LOCKED
-Tilt locked
-Tilt motor fault
-Tilt encoder fault
-Tilt motor driver on Pan&Tilt PCB fault
-Wiring connection between Tilt encoder and
Pan&Tilt PCB fault
PAN ZERO SENSOR LINE -Pan magnet missing
-Pan hall sensor PCB fault
-Wiring connection between Pan hall sensor PCB
and Pan&Tilt PCB fault
TILT ZERO SENSOR LINE
-Tilt magnet missing
-Tilt hall sensor PCB fault
-Wiring connection between Tilt hall sensor PCB
and Pan&Tilt PCB fault
TEMP. LED MOD. LED module temperature detected under -10°C or
over 90°C.
Unit immediately goes in black-out.
TEMP. LED DRV 1 Output from 1 to 4 of LED Driver PCB temperature
detected under -10°C or over 90°C.
Unit immediately goes in black-out.
TEMP. LED DRV 2 Output from 5 to 8 of LED Driver PCB temperature
detected under -10°C or over 90°C.
Unit immediately goes in black-out.
TEMP. LED MICRO Micro controller on LED Driver PCB temperature
detected under -10°C or over 80°C.
Unit immediately goes in black-out.
TEMP. SENS n Thermal sensor
“number” damaged.
Unit immediately goes in black-out.
COLOUR DATA INTEGRITY*
* In case of LED Driver PCB replacement
will be shown these error messages
NOT PRESENT: LED calibration not made
READ ERROR: LED calibration data reading problem
INCOMPLETE DATA:
LED calibration incomplete data
SUPPLY VOLTS TOO LOW PCBs input voltage <46,5Vdc.
SUPPLY VOLTS TOO HIGH PCBs input voltage >49,5Vdc.
BUS ZOOM BOARD -Pan&Tilt PCB driver fault
-Zoom motors PCB driver fault
-Zoom motors PCB input voltage missing
-Internal Bus wiring connection fault
BUS LED DRIVER -Pan&Tilt PCB driver fault
-LED Driver PCB driver fault
-LED Driver PCB input voltage missing
-Internal Bus wiring connection fault