DTS EUPHONY 3, Руководство пользователя, Страница: 11 / 36

11
7.2 Protection against liquids
The projector contains electric and electronic components which should under no
circumstances come into contact with oil, water or any other liquid.
The proper unit functioning would be compromised should this occur.
7.3- Movement
Pan: 540° rotation (1.8 sec.) ; Tilt: 215° rotation (1 sec.).
Do not place any obje
ct in the path of the projector’s movement.
7.4- Risk of fire
Each fixture produces heat and must be installed in a well-ventilated place.
Minimum distance from the objects and the people lit by the light beam: 0,5 m.
7.5- Forced ventilation
You will note, on inspection, that the unit features various air inlets and cooling fans
located on both the base and head of the fixture.
These should, under no circumstances, be blocked or obstructed whilst the projector
is in operation. Doing so could cause the fixture to seriously overheat thereby
compromising its proper operation.
7.6- Ambient temperature
The projector should never be installed in places that lack a constant air flow.
The ambient temperature should not exceed 40°C.
8- MAINS CONNECTION
EUPHONY 3 operates at 100-240Vac 50-60 Hz.
Prior to connecting the unit to your mains supply, ensure that the model in your
possession correctly matches the mains supply available.
For connection purposes, ensure that your plug is capable of supporting 2,5 amps
at 230Vac or 5 amps at 100Vac each unit connected.
Strict adherence to regulatory norms is strongly recommended.
FUSE MAINS IN 100-240Vac 50-60 Hz
T 5A 250V PowerCON TRUE1 male panel connector
MAINS OUT MAX 16A
Max 6 EUPHONY units @ 230Vac
Max 3 EUPHONY units @ 100Vac
PowerCON TRUE1 female panel connector
8.1- Protection
The use of a thermal magnetic circuit breaker is recommended for each EUPHONY 3.
A good earth connection is essential for the correct operation of the projector.
!
!