DTS DRIVENET 1664, Руководство пользователя

Страница: 28 / 47

User Manual
Ver. 1.00 26 di 43
DRIVENET
MAIN MENU LEVEL 1 LEVEL 2 LEVEL 3 FUNCTION
DISPLAY
POSITION
ON THE GROUND
Reverses display's reading
depending on the mounting
position. On the ground or
suspended.
Default = ON THE GROUND
SUSPENDED
STANDBY
OFF
Display stand-by disabled.
(Default)
ON
Display goes OFF after 30
seconds (10 seconds for
DRIVENET 416)
DMX MODE
10 CH
Allows to select 10 DMX
channels mode (Default)
8 CH
Allows to select 8 DMX
channels mode
4 CH
Allows to select 4 DMX
channels mode
2 CH
Allows to select 2 DMX
channels mode
1 CH
Allows to select 1 DMX
channel mode
D8CH
Allows to select D8CH mode
(8 ch dimmer)
D4CH
Allows to select D4CH mode
(4 ch dimmer)
D2CH
Allows to select D2CH mode
(2 ch dimmer)
CUST
Allows to select CUSTOM
mode (8channels with
independent DMX address)
LED
SMOOTH OFF - 20
Allows to select the value of
delay (in ms) for Dimmer
channel reaction to DMX or
program variation.
OFF = Instant response.
4 = 100 ms smooth response
(Fast) (Default).
20 = 500 ms smooth response.
(Slow).
GAMMA CORR.
QUADRATIC
Allows to set quadratic
current output for LEDs
(Default).
LINEAR
Allows to set linear current
output.
OUTPUT
FREQUENCY
610 - 10000 HZ
Allows to adjust the PWM
frequency value (Hz) in order
to reduce flickering in the
process of camera recordings.
Range = 610 Hz – 10 KHz
Default = 610 Hz
BOOST
ON
Allows to increase the LED’s
current from 490 mA to 700
mA.
Default = OFF
OFF
SPLS
ON Allows to sync the pulse
between multiple units.
Default = ON
OFF
DEFAULT SET
To restore factory settings.
TEMPERATURES
Display board and LED Driver
boards temperature
monitoring.
TIME
Shows the total unit life time
and the8 channel output life
time.
SOFTWARE V.1.00
Software version