DTS DRIVENET 1664, Руководство пользователя

Страница: 18 / 47

User Manual
Ver. 1.00 16 di 43
DRIVENET
DRIVENET 1664 and 1664 24Vdc can be used in eight different DMX modes: 64 ch (default), 128 ch, 10 ch,
14 ch, 160 ch, 224 ch, 96 ch or 1 ch mode.
If you want to use the DRIVENET 1664 / 1664 24Vdc in 64 channels mode, select the “
Full type – 8 bit 64ch ”
mode from the DMX MODE menu, under DMX SETUP, and set the following addresses on the mixer:
Device 1 A001
Device 2 A065 If you want to select the next device, just add “64” to the former DMX address
Device 3 A0129
….. A….
Device 6 A321
If you want to use the DRIVENET 416 / 416 POWER / 832 / 832 24Vdc / 832 POWER / 832 POWER 24Vdc /
1664 / 1664 24Vdc
in 10 channels mode, select the “
Z1 type – 8 bit 10ch
” mode from the DMX MODE menu,
under DMX SETUP, and set the following addresses on the mixer:
Device 1 A001
Device 2 A011
If you want to select the next device, just add “10” to the former DMX address
Device 3 A021
….. A….
Device 6 A051
8.3 Setting Up the DMX Address
1 Press the UP and DOWN key until you reach the desired DMX address. The numbers on the display will
start flashing (new DMX address hasn't yet been set).
2
Press ENTER to confirm your selection. The numbers on the display will stop flashing; the device is now
set to the new DMX address.
TIP : if you keep pressed down the UP or DOWN keys, address scrolling will be quicker allowing thus for a
faster selection.