Configuring the WL2 card using the SMART CONFIG method should be performed as follows:
Step 1
: Download the free "WL2 Config" application from the GooglePlay or AppStore store to your
smartphone
Step 2
: Connect the smartphone to the WiFi network to which the WL2 card is to be connected
Step 3
: Run the "WL2 Config" application, enter the password for the selected WiFi network and press
"Confirm" in the application
Step 4: Press and hold the "Connect" button on the WL2 card until the red CON LED flashes.
After the correct pairing of the WL2 card with the router, the card will restart automatically. A correctly
paired card will connect to the router, which is signaled by the yellow LINK diode lighting up.
4.3. HOT SPOT method
Configuring the connection by this method does not require physical access to the router. It is
necessary to use a smartphone as an access point ('hot spot' function).
It is recommended only for the first connection of the card to the server. For security reasons, it is
necessary to change the access network later from the cloudflex.dtm.pl website (Wi-Fi tab).
Configuring the WL2 card connection using the HOT SPOT method should be performed as follows:
Step 1
: Activate the HOT SPOT mode on the smartphone and set the access password:
"WL2ADMIN”
note: character size is important, the network (SSID) can be any name
Step 2
: Press and hold the "Connect" button on the WL2 card until the green AUT LED flashes.
The card will connect via a smartphone to the CloudFlex server. This is indicated by the yellow LINK diode
and the red CON diode lighting up.
Due to the generally known access password, the connection made using the HOT SPOT method
is not secure and ultimately the access network should be changed, e.g. remotely, after logging in
to the cloudflex.dtm.pl website.
EN