Do not mount mirrors or reflection screens in photocell's working area
Beware of optical receiver/transmitter elements staining while mounting.
4. Photocell connection
Photocell cooperates with most of gate controllers available on market. It is
recommended to do electrical installation and photocell mounting by qualified person.
Connect photocell according to fig. 3 scheme. First find 24V AC/DC clips (polarity is not
important!) intended to power supply, in gate controller. Connect power supply to receiver
and transmitter. When power is on red LED
’
s (POWER) in receiver and transmitter light. Next
connect gate controller input to photocell's receiver output (RX pins: 1,2 or 2,3). Pay attention
Fig. 2
Assembly dimentions - scale 1:1, transmitter (receiver) assembly drawing
72 mm
22 mm
4
3
2
1
DTM System spółka z ograniczoną odpowiedzialnością spółka komandytowa
ul. Brzeska 7, 85-145 Bydgoszcz, POLAND
tel./fax. (52) 340-15-83, 340-15-84
www.dtm.pl, [email protected]
phoyocell
FOCUS / FOCUS FLASH
MOUNTING INSTRUCTION
Legend:
1. Cover
2. Humidity carrying opening
3. Splash proof internal bowl
4. Signal conduits opening =6mm
f
USE THIS FIGURE
AS A TEMPLATE