11
5.1.
SW button and LED STATUS
The SW button (see fig. 2, point 19) is used to restore the default settings of the controller.
The STATUS diode is a status diode informing about the controller operation.
5.2. Pairing the controller with Bluetooth™ device.
In order to use the application to configure the device, it is necessary to pair the controller
Bluetooth™ interface with the device from which the configuration will be carried out, eg a telephone.
5.2.1. Launching the Application and Bluetooth ™ communication
Run the Blue Motor Control application and if Bluetooth was not previously turned on in the
phone, let the application turn it on.
Programming
Figure 6.
Enabling Bluetooth ™ on the configuring device.
