DTK PRM-68I, Руководство пользователя

Страница: 37 / 38

Quick Guide
31
III) BIOS Setup
If the first time installation of this system board, please press the “DEL” key to get
into the BIOS Setup while Power-on memory testing, and select “Load Optimized
Defaults”, and then select the Frequency/Voltage Control to choose the proper
“CPU Clock Ratio” for the CPU installed. For example, X6 should be selected for
Celeron 400MHz CPU, and the default “CPU Host/PCI Clock” is 66/33MHz, don’t
over specification selected. Actually, the currently Celeron 66MHz based CPU,
always locked the CPU Clock Ratio inside. So the Ratio selected is not take in
effect, the Optimized defaults loaded is enough for this jumperless mainboard.
Don’t change any setting in the “Advance Chipset Features” which are important
factors for the stability of this system. If an incorrect setting caused the system can
not boot, just turn off the power, and then press “ESC” key until the power turned
on again and the BIOS Title displayed. It’s a safe mode to recover the system.