DTK PRM-0081I E1, Руководство пользователя

Страница: 41 / 49

Award BIOS Setup Guide
35
4.8 LOAD SETUP DEFAULTS MENU
This Main Menu item uses the default setup values. Use this option as a diagnostic
aid if the system behaves erratically. Choose this item and the following message
appears:
“Load SETUP Defaults (Y/N)? N”
To use the Power-On defaults, change the prompt to “Y” and press <Enter>.
4.9 SUPERVISOR PASSWORD
Two level of password is supported. Depending on the setting of the “Security
Option”
“BIOS FEATURES SETUP”, the system BIOS will ask for password
every time booting up the System or entering BIOS Setup. With the supervisor
password, both the system booting and BIOS setup changing is allowed.
This main menu item lets the user to set up the Supervisor Password.
Change the password as follows:
1. Choose “PASSWORD SETTING” in the Main Menu and press <Enter>. The
following message appears:
“ENTER PASSWORD:”
2. Enter the Password and press <Enter>. The following message appears:
"CONFIRM PASSWORD:"
Important: Keep a safe record of the new password. If forget or lose the
password, the only way to access the system is to disconnect the
CMOS batteries and then re-enter the password.
4.10 USER PASSWORD
With the user password, only booting up the system is accepted, but changing the
BIOS setup is not allowed.