DTK PAM-0073I, Руководство пользователя

Страница: 36 / 48

Chapter 4
30
DRAM Speed
Specify the RAS access speed of the SIMMs installed in the motherboard as system memory. The
settings are 60ns, 70ns, or Manual. The default is 70ns.
8-Bit I/O Recovery Time (SYSCLK)
This option specifies the length of the delay (in SYSCLKs) inserted between consecutive 8-bit I/O
operations. The settings are 1, 2, 3, 4, 5, 6, 7, or 8. The Optimal and Fail-Safe default settings are
1.
16-Bit I/O Recovery Time (SYSCLK)
This option specifies the length of the delay (in SYSCLKs) inserted between consecutive 8-bit I/O
operations. The settings are 1, 2, 3, 4, 5, 6, 7, or 8. The Optimal and Fail-Safe default settings are
1.
4.6 POWER MANAGEMENT SETUP
The Power Management Setup options described in this section are the standard
options as shown on the following screen.
AMIBIOS SETUP - POWER MANAGEMENT SETUP
(C)1996 American Megatrends, Inc. All Rights Reserved
Power Management/APM
Instant On Support
Green PC Monitor Power State
Video Power Down Mode
Hard Disk Power Down Mode
Hard Disk Time Out (Minute)
Standby Time Out (Minute)
Suspend Time Out (Minute)
Slow Clock Ratio
Display Activity
Serial port 1
Serial port 2
Parallel port
Floppy disk
Primary IDE 0
Primary IDE 1
Secondary IDE 0 : Disabled
: Disabled
: Stand By
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: 0-12.5%
: Ignore
: Ignore
: Ignore
: Ignore
: Ignore
: Ignore
: Ignore
: Ignore Available Options:
Disabled
Enabled
Secondary IDE 1 : Ignore
ESC: Exit
↑↓
: Sel
PgUp/PgDn: Modify
F2/F3: Color
Fig. 16 Power Management Setup Menu