DTK PAM-0070S, Руководство пользователя

Страница: 40 / 72

Chapter 4
34
A short description of the screen items follows:
Power Management: Available selection are “Disabled”, “User Define”, “Max Saving” and
“Min Saving”:
“Disabled” will disable all the power saving functions.
“User Define” makes the time period waiting for Suspend Mode to be programmed.
“Max Saving” will set the time period waiting for Suspend Mode to be 20 seconds.
“Min Saving” will set the time period waiting for Suspend Mode to be 40 minutes.
PM Control by APM: Available options are “Yes” and “No”. To choose “Yes” to let the Power
Management Function to be control by the MS APM software.
Video Off Option: Select the mode in which you want the monitor to blank. The options are
“Always On”, “Suspend
→
Off”, “Susp, Stby
→
Off” and “All mode
→
Off”.
Video Off Method: Choose V/H SYNC+Blank, DPMS or Blank Screen. This is monitor Power
Saving Method. V/H SYNC+Blank means turn off Vertical, Horizontal scanning and blank the
screen. Blank Screen will blank the display screen. DPMS (Display Power Management
System) can allow the System BIOS control the Display Card to turn off the Display.
Suspend Option: Available options are “Static Suspend” and “0V Suspend”. For “Static
Suspend” option, the system will enter the suspend mode with the power supply still switching on
by switching the power button. For “0V Suspend” option, the system will fully power off the
system when it entering the suspend mode by switching the power button. With installing the
Award Zero-Volt Data-Suspend Utility (ZVHDD), the system will resume back when the system
power on again by switching the power switch.
MODEM Use IRQ: Available options are 3, 4, 5, 7, 9, 10, 11 and NA. It is used to choose the
interrupt line that the Modem is used. “NA” means not available.
Suspend Mode: To set the time period waiting for Suspend Mode when the Power Management
function is set to “User Define”.
HDD Off After: To select the time period will turn the HDD off. Accessing the HDD again will
take a few seconds for HDD to spin up for operation.
IRQ 3 - IRQ15: When it is enabled, the system will monitor the activity of the corresponded
system IRQ to turn on or off the power management functions.