DTK PAM-0057V, Руководство пользователя

Страница: 40 / 58

Chapter 4
34
A short description of the screen items follows:
Resources Controlled By: The Award Plug and Play BIOS can automatically configure all the
boot and Plug and Play compatible device. If you select Auto, all the interrupt (IRQ) and DMA
assignment fields disappear, as the BIOS automatically assigns them.
Reset Configuration Data: If enable this option, the BIOS will clear and reset the ESCD after
hardware reset.
IRQ#/DMA# assigned to: These items will be shown only when “Resources Controlled By”
option is set the “Manual”. The available options are “Legacy ISA” and “PCI/ISA PnP”. If the
option is set to “Legacy ISA”, the BIOS will never assign the specified IRQ/DMA resource to
PCI or ISA PnP Devices. If “PCI/ISA PnP” is chosen, the BIOS will make the specified
IRQ/DMA have a chance to be assigned to the PCI or ISA PnP devices.
CPU to PCI Write Buffer: It is used to enable or disable the CPU to PCI Write Buffer.
PCI Dynamic Bursting: It is used to enable or disable the PCI dynamic bursting cycles.
PCI Master 0 WS Write: Choose enable to let the PCI Master using 0 wait state in write cycle.
PCI Peer Concurrency: Choose Enabled or Disabled. To enable this option will let the system
active more than one PCI device at a time.
PCI Delay Transaction: Select “Enabled” to use the write buffer for the delay transaction
cycles. It is selected to support the compliance of PCI Specification Version 2.1.
PCI IRQ Active By: Choose Level or Edge. The default settings is Level.
PCI IDE IRQ Map To: Choose PCI-AUTO, PCI-SLOT1, PCI-SLOT2, PCI-SLOT3, ISA.
The default setting is PCI-AUTO.