DTK PAM-0057I, Руководство пользователя

Страница: 9 / 56

Introduction
3
PCI IDE
•
On board supports PCI Master IDE Controller, two connectors support up to four IDE
devices such as HDD, CD ROM drive and Tape Back-up drives, etc.
•
PCI Master IDE controller supports PIO Mode 3 and 4 devices, I/O data transfer rate can be
up to 17Mb/s. DMA mode transfer rate can be up to 22Mb/s.
•
Ultra DMA mode supported. Transfer rate can be up to 33Mb/s.
System BIOS
•
Award BIOS (128KB Flash EPROM).
Slots
•
Four PCI slots
•
Four ISA slots
Board
•
4 Layer
Form Factor
•
2/3 Baby AT Size (220 x 260mm)
Environment
Working Specifications
Actual Field MTBF (hours) 104,515 hours
Preventive Maintenance Not Required
Environmental Limits
Operating Non-operating
Temperature 0 to 50 Degree Celsius -10 to 65 Degree Celsius
Relative Humidity
(without condensation)
8 to 85% 5 to 95%
Altitude 10,000ft 40,000ft
Power Specifications
Configuration: 133MHz Intel P54C CPU, 16MB 60ns EDO SIMM, 256KB Cache, 3.5 inch
floppy drive, 840MB Hard Disk, running at DOS prompt.
DC Voltage Tolerance Consumption (mA)
+5V +/- 5% 860
+5V Stand by +/- 5% 0.5
+5V +/- 5% 0
+12V +/- 5% 200
-12V +/- 5% 30