DTK PAM-0050S, Руководство пользователя

Страница: 70 / 131

Chapter 4 62
4.4.5.3 MULTIPLEXER
In Record mode, the Audio Rack 32 mixer will behave like a multiplexer
with some hardware setups. What makes a multiplexer different from a
mixer is that on a multiplexer only one recording source is available at any
one time. All other sources are muted. So if you select the microphone
source by clicking on the mute button labeled
Mic , all other sources shown
will be muted.
There are four ways to tell if you have a multiplexer in Record mode
instead of a mixer. They are:
1. Only one mute button is lit at any one time.
2. The monitor button is disabled.
3. Control of the Master volume is unavailable.
4. There is a source labeled Mixer .
In all other ways a multiplexer looks and behaves as a mixer.
Note: The multiplexer exists only in Record mode, not in Playback mode.
4.4.5.4 RECORDING FROM MIXER SOURCE
Multiplexers will have a source labeled Mixer . You can use this source to
mix audio for recording. The Mixer source uses the mixer in the Playback
mode as a source for audio. To mix audio for recording, select the Mixer
source in Record mode. Next, select Playback mode. Select from the
sources available the ones you want to record and adjust their balance and
volume. For example, if you want to sing with a CD and record it, make
sure that the mute buttons for
Mic and CD are lit and adjust the balance and
volume of these two sources to your liking. Return to the Record mode and
you can use the Mixer source as a Master volume and balance control
adjusting the volume and balance of the mixed audio from the mixer in the
Playback mode. Now you are ready to start recording. Click on the record
button and play the devices you wish to record from.