DTG-C Model X, Руководство по обслуживанию

Страница: 71 / 111

MESSAGE DEFINITION
Performing white ink circulation
While W1W2 circulation
Please wait
Table is moving
Printing Machine is printing.
Receiving data
Receiving the Job data
Right flushing box full
Right flushing box is full
An error status - To recover, replace right ink sump
Right flushing box is nearly full
Printer will stop working when
the box comes to full Right flushing box is nearly full
It is warning -
To recover, prepare to replace left ink sump
Room temperature is too high,
it can
cause printing quality problem Room temperature is higher than 30.0
Room temperature is too low,
it can cause printing quality
problem Room temperature is lower than 10.0
The temperature is too high
When it’s in the operation state already, if the temperature become high (more than
approximately 40 ), it will occur. It is necessary to do power off.
The temperature is too high.
Able to print.
When an operator turns power on, but the temperature is high (more than
approximately 40 ). Wait a moment, if the temperature is less than 40 ,
printer will become active.
The temperature is too low
When it’s in the operation state already, if the temperature is low (below
approximately 1 ), it will occur. It is necessary to do power off.
The temperature is too low.
Able to print.
When an operator turns power on, but the temperature is low (below
approximately 1 ). Wait a moment, if the temperature is more than 1 ,
printer will become active
Updating CTL Firmware.
Please wait. While update MODEL X DTG ‐ C Controller
Updating SCB Firmware.
Please wait.
While update SCB
Waste ink bottle is nearly full
Waste ink is nearly full
It is warning status - Prepare to empty waste ink bottle.
Waste Ink Full
Empty the waste ink bottle
before reset the waste ink
counter.
Waste ink is full
An error status - To recover, Empty waste ink bottle.