CLASSIC Wheels - Technical Manual
2
General
V2
01
5.
0
6
_E
N
1 General
Validity
This manual describes the component specified on the front page and the footer. It is valid for the construction
level of the component on the 2015-07-25. Deviations are possible and all items are subject to technical chan-
ges.
Safety
The safety instructions are classified as follows:
Target Group
This manual is intended for end users and dealers.
It offers the possibility for experienced users to carry out small maintenance works on their own. If there are
any doubts concerning the own skills, a DT Swiss service center should be contacted.
Warranty will expire if works are not done properly.
Layout
The cover page and the footing provide information about the type of product and manual as well as the ver-
sion of the manual.
The backside provides a list of the DT Swiss service centers. A list of all DT Swiss service centers can be found at
www.dtswiss.com.
This manual is intended for being printed as an A5 booklet. Only print this manual if electronic usage is not pos-
sible.
DANGER
...indicates a hazardous situation that, if not avoided, will result in death or serious injury.
CAUTION
...indicates a hazardous situation that, if not avoided, could result in a minor or moderate injury.
NOTICE
...indicates information considered important, but not hazard-related.
...characterizes further information, or information which supplement the respective steps.
