DT Research WebDT 375, Руководство по эксплуатации

Страница: 46 / 59

WebDT 375 Operation Guide
375V0304.0139 41
The WebDT 375 is now powered off. You will need to press the Suspend button again briefly to power the unit
back on. If you continue to have problems turning the device off, contact your device provider for support.
NOTE:
The Reset/Power Off and subsequent restart of the device by briefly engaging the Suspend button is often
referred to as Cold Boot of the device. During this process, you may lose device settings or user data that have not
been properly saved in the WebDT 375. To ensure that settings such as profiles, dates, etc. are properly saved,
you should engage the Save Registries function via Start > Settings > Control Panel > Registries Save/Restore icon
as soon after you made any modifications as possible. To properly save user data, you should save the
information or files to external flash memory, e.g., My Computer > Storage Card and its sub-folders.
NOTE:
All settings are also automatically saved if the device battery level drains down – past system warnings – to
lead to device shutdown.
How do I power back on when the unit enters Suspend mode and turns the screen off?
To wake the WebDT 375 from Suspend mode, press briefly on the Suspend button on the left side of the WebDT
375. The screen will turn back on within a couple of seconds, and you can resume using the unit.
I changed my mind immediately after recovering from Suspend mode and wish to put the device into
Suspend again. Why is it that the Suspend button appears non-responsive?
Each time you recover from Suspend mode, it takes 10-15 seconds for the system to totally recover, although you
can see the display and use the system within 1-2 seconds. During this recovery period of 10-15 seconds, the
system shall not be able to process any request to re-enter Suspend mode. As soon as the system has fully
recovered, a single Suspend request shall be processed if a single or multiple Suspend requests were made during
the recovery period.
BATTERY
How do I set it so that it saves power?
From the Control Panel (Start > Settings > Control Panel), double-tap on the Power icon. Choose the Schemes
tab. Set the time to enter Suspend mode in this window. The time menus are effective in a consecutive or
sequential manner.
You can also put the unit in Suspend mode manually by pressing the Suspend button momentarily and letting go.
In a few seconds, the WebDT 375 will enter Suspend mode.
NOTE:
Place the WebDT 375 in Suspend mode when not using the unit. This will conserve battery power.
Power (Management) Schemes Window