DT Research WebDT 375, Руководство по эксплуатации

Страница: 15 / 59

WebDT 375 Operation Guide
375V0304.0139 9
iii) If you want to recalibrate or your device is not responding properly to your taps, select “
Calibration”,
follow the instruction to recalibrate. When you are done, click on “
OK
” to continue.
d) System Properties Set Up
Click on “
System
”; the System Properties window will appear.
i) Click on “
General
”, the System information will be displayed. Then click on “
OK
” at the top of the
window for confirmation.
ii) Click on “
Memory
”, you can adjust the allocation of unused RAM to run programs or for storage (by
moving the arrow to right or left). After changes, click on “
OK
” at the top of the window for
confirmation.
iii) Click on “
Device Name
”, you can provide a unique name to the device as identification for network
resource access such as file sharing, etc.
Reading and Sending E-mail
You may choose to use the local email client (Inbox) instead of web-based email solution.
Inbox Configuration
i) Open Inbox program.
ii) Go to Services tab, select “
Options
”. After you click on “
Options
” you will see in a new window five tabs,
which are: “
Services
”, “
Compose
”, “
Read
”, “
Delete
” and “
Storage
”.
iii) Select “
Services
”, click “
Add
”, choose which type of email service do you have, “
IMAP
” or “
POP3
”, and
select one.
iv) In the Setup Mail definition (IMAP or POP3) you must provide the information required “
Connection
”,
“
Server
”, “
User ID
”, and “
Password
”. If you don’t have these information contact your Network
Administrator.
v) Click “
Next
”.
vi) In this window you will configure the “
Connections Settings
”. There are several options – use the default
values and click “
Next
”.
vii) The last window is the “
Mail Inbox Preferences
”. Select the options more suitable to your needs – you
either need to get the full copy messages or you want the headers only.
NOTE:
Files in .TXT, .DOC, .DOT, .RTF, HTML, .GIF and .JPG formats may be read.
Accessing the Internet with the Internet Explorer
1.
When you want to surf the web, click on “
Internet Explorer
” in the Desktop screen – the WebDT 375 will
display the default web site (for example, www.cnn.com ). You can change the default web site by using IE
browser,
View
in menu bar,
Internet Options
.
2.
If you want to leave the Internet to go to Windows CE desktop yet you want to keep the web browser open, just
“minimize” the browser window. You can click on the Windows CE Taskbar any time to return to the browser.
3.
The IE browser in CE .NET is based on the IE 5.5 engine.
4.
You may wish to examine and manipulate your browser configuration options through
Internet Explorer >
View > Internet Options
to optimize your experience.