HOME SECURITY CONTROL SYSTEM
DSW01
INSTRUCTION
The system adopts wireless digital coding, high-frequency emission and receiving, and the repetitive code rate is
very little, it adopts MCU control and on technology adopts SMT , it can connect all kinds of detectors our company
produce, for example PIR detector, door magnetism, smoke alarm, out-connected alarm, out-connected dial number
equipment, at the same time it gather wireless doorbell, tamper protection, low-voltage indicate. It has two remote
controllers, its operation is very convenient, it can guard your family from multi-orientation.
SPECIFICATION
1 voltage
（
power adapter convert
）
:110VAC 230VAC
2 standby power:9V/DC
（
6
×
AA
）
3 operate frequency: 433MHz 315 MHz
4 operate channel:6(wireless channel has 6, 2 of 6 are also wire channels)
5 alarm method:sound and light alarm indicator
6 alarm current:150mA
7 out power static current: 26 mA
8 standby power static current:16 mA(when out power cut)
9 alarm time:3Min 30seconds
10 alarm sonority:90db
11 remote control distance:
≥
30m( wide place)
12
battery low-voltage alarm:7.5V~7.9V
13 the system include unit: general controller(with power adapter)
、
single doorbell remote controller(battery
included)
、
4-key remote controller(battery included)
、
power adapter(input voltage 110VAC/230VAC, output voltage
10~12V/DC, current 1A)
、
DPS-55 PIR detector(battery included)
、
door
magnetism(battery included). The unit for choosen: other type detector
、
smoke alarm with RF
、
dial number equipment etc.
14 working LEDs:
Ch1~Ch4: red, wireless detector channel LED;
Ch5~Ch6: red, both wireless and wire detector channel LED
；
Fortify: green, fortify LED
；
Low-battery: green, battery low-voltage LED
；
Power LED&Panic key: green, out power LED. when out power is
connected, it lights. At the same time, the key is panic key, press
the key, the general controller give panic alarm.
SUMMARY
1. channel indicate:
when detector working, general controller
alarm and corresponding channel LED should light.
2. low-voltage indicate:
when standby power is below set value, cut off out power, you can see Low-battery LED
flashing and remind you to replace battery in time.
3. tamper protection:
when front cover is opened, general controller will give alarm, the 8 LEDs on the left and
right all flash.
4. two remote controllers:
z
single-key doorbell remote controller: power voltage DC12V, it can be installed out of the door and
used as remote control doorbell;
z
4-key remote controller: power voltage DC12V, it is used for panic alarm, time-delay fortify, quick fortify,
cancel.
5. fortify:
when host leave home, use remote controller to set general controller on fortify state, when someone
enter its detection field, general controller will give alarm (>90db), if connect dial number implement of our company,
general controller will also give alarm weft, for example 110 or your home’s telephone.
6. cancel:
after host come back home and cancel the general controller’s fortify state, when host enter detection
field, the general controller will not alarm.
Ch6
Ch5
Low-battery
Fortify
Power LED&Panic key
Ch4
Ch3
Ch1
Ch2
GENERAL CONTROLLER
