12
* A first inspection should be conducted by an authorized DSRaider service center, 2 weeks
or 200 km (whichever comes first) following delivery of the EZRaider. Only one such service
center inspection is required. The rest of the maintenance activities should be conducted at the
intervals specified in the table.
** The suspension axis should be greased following every drive through water.
Months
2
*weeks
3
12
Kilometers
*200
1000
5000 10000 25000
Engine
Check for loose parts and bolts
ü
ü
Tighten engine bolts
ü
ü
Steering
Check for loose parts
ü
ü
Check steering alignment
ü
ü
Check for loose parts in hub-bearing
front wheels
ü
ü
Front
Suspension
Visual check of suspension rubber
ü
ü
Visual check of rubber support
tightening bolt
ü
ü
Grease bottom suspension axis**
ü
ü
Check for loose parts - bottom axle
front suspension
ü
ü
Replace slip bearings front suspension
ü
Rear
Suspension
Visual check of suspension rubber
ü
ü
Visual check of rubber support
tightening bolt
ü
ü
Grease bottom suspension axis**
ü
ü
Replacing slip bearings rear
Suspension
ü
Controllers
Visual check: base, connections,
cleanliness, clasps
ü
ü
Check that wiring is intact, with no
ruptures or scratches
ü
ü
Battery
Visual check: base, connections,
cleanliness, clasp
ü
Battery enclosure check
ü
ü
Battery replacement at an authorized
DSRaider service center
ü
