* *
8 Channel Amplifier Matrix Controller
16
Explanation on priority of channels to call standby amplifier: the standby power amplifier is first called to the
channel with high priority. For example, when the standby power amplifier has been used by channel CH3, and
the main power amplifier of channel CH1 fails, the system will automatically call the normally connected standby
power amplifier. When a channel is OFF, the channel no longer has main and standby switching function.
c)
When the device is under 4 mains and 4 standbys working mode, there are 8 default external power
amplifiers. As the main interface shown in the Figure 3-18. The standby power amplifier that can be
called for each channel is identified (see Table 3-3 for details). Now the zone setting interface is as
shown in Figure 3-19:
Figure 3-18 Main interface of 4 mains and 4 standbys working mode
Figure 3-19 Zone setting interface of 4 mains and 4 standby working mode
Channels
Main amplifier
Standby amplifier can be
called
CH1
AMP1
AMP5
CH2
AMP2
AMP6
CH3
AMP3
AMP7
CH4
AMP4
AMP8
Table 3-3
