DSPPA MAG6182II, Руководство пользователя

Страница: 37 / 76

* *
Network Address System
Network Public Address System Network Public Address System 32
4.3.4 Alarm
Before manual alarm operation, the user should touch the "Set" button on the right corner of the main interface to
enter system settings interface. In the "source management" set the alarm sound. If don't set, the alarm will set
with the default settings.
System Setup Figure
:
After the alarm volume is appropriately set up and returning to the main interface, the user can touch the "Ful. A"
button in "Alarm Operation" column, and a prompt window appears, as shown in Fig (8). The user can select
"Yes" to deliver an alarm to all zones. After the alarm is finished, the user should touch "Ful. S" button to stop the
alarm. The user may also choose to deliver alarm to a specific zone and the operating procedures are the same as
those for delivering alarm to all zones.
4.3.5 Program control
When the terminal is in timed status, select to stop the timing of the terminal, click “program control”, the clock
icon turns into gray, timing work is stopped. Click “program control” again, clock icon turns back, but no timing
work anymore, as shown in figure (9) (10)
figure (8)