DSPPA MAG6182II, Руководство пользователя

Страница: 15 / 76

* *
Network Address System
Network Public Address System Network Public Address System 10
There are 4 audio channels from right to left, for connection to other audio source devices (such as DVD player)
5. DIP switch
When the parameters of this module cannot be found, such as IP is not clear, pull down one of the four dial keys,
the indicator will be on, and the local parameters will recover the following specific parameters:
IP
：
192.168.18.2 GATE
：
192.168.18.1
Mask Code
：
255.255.255.0
Main server IP
：
192.168.18.250 Standby server IP
：
192.168.18.251
6. DIP indicator
The indicator is on when the user uses DIP switch to modify IP address.
Functional features:

Modular design, with each module capable of input 4 audio channels;

Conversion of analog audio signal to digital audio signal which is sent to the network at request of the
controller;

Full digital design, HiFi, high speech transmission index.
The four-channel audio input module can be installed on the extension card slot of the network PA Host
with 2 screws.
2.2.1 Settings of four-channel audio input module on the host
To set the four-channel audio input module in network PA host, first install and connect the module, and then
modify the IP address of the module to be in the same network segment as the host (see 5.8.2 Equipment
Maintenance). To set the parameters, enter the "device settings" interface, double-click the audio input card or
click the "edit" button, and check the "terminal number", "version number", "terminal type" and "IP address" of
the device as shown in the below figure. "Terminal name", "transit server", "channel name" and “channel volume”
can be set. Then click the "save" button in the lower right corner to take effect.