DSPPA DSP9323, Руководство пользователя

Страница: 8 / 47

* *
SIP Intercom System
8
/ 47
"iDoorPhoneNetworkScanner.exe" software to find the IP address of the device.

Note: when power on, 30s waiting is needed for device running.

Log on to the WEB device configuration.

In a Line page configuration service account, user name, parameters that are required for server address
register.

You can set DSS key in the Function key page.

You can set Door Phone parameters in the Webpage (EGS Setting-> Features).
III. Basic operation
1. Answer a call
When a call comes in, the device will answer automatically. If you cancel auto answer feature and set
auto answer time, you will hear the bell ring at the set time and the device will auto answer after a
timeout.
2. Call
Configure shortcut key as hot key and setup a number, then press shortcut key can call the configured
number.
3. End call
Enable Release key hang up to end call.
4. Open the door operation
Through the following seven ways to open the door:
1) Input password on the keyboard to open the door.
2) Access to call the owner and the owner enter the remote password to open the door.
3) Owner/other equipment call the access control and enter the access code to open the door. (access code
should be included in the list of access configuration, and enable for remote calls to open the door)
4) Swipe the RFID cards to open the door.
5) By means of indoor switch to open the door.