DSPPA DSP9323, Руководство пользователя

Страница: 24 / 47

* *
SIP Intercom System
24
/
47
Dial Without
Registered
Set call out by proxy without registration
Click To Talk Set Click To Talk
User Agent Set the user agent, the default is Model with Software Version.
Use Quote in Display
Name
Whether to add quote in display name
Ring Type Set the ring tone type for the line
Conference Type
Set the type of call conference, Local=set up call conference by the device
itself, maximum supports two remote parties, Server=set up call conference by
dialing to a conference room on the server
Server Conference
Number
Set the conference room number when conference type is set to be Server
Transfer Timeout Set the timeout of call transfer process
Enable Long Contact Allow more parameters in contact field per RFC 3840
Enable Missed Call Log If enabled, the phone will save missed calls into the call history record.
Response Single Codec
If setting enabled, the device will use single codec in response to an incoming
call request
Use Feature Code
When this setting is enabled, the features in this section will not be handled by
the device itself but by the server instead. In order to control the enabling of the
features, the device will send feature code to the server by dialing the number
specified in each feature code field.
Specific Server Type Set the line to collaborate with specific server type
Registration Expiration Set the SIP expiration interval
Use VPN Set the line to use VPN restrict route
Use STUN Set the line to use STUN for NAT traversal
Convert URI Convert not digit and alphabet characters to %hh hex code
DTMF Type Set the DTMF type to be used for the line
DTMF SIP INFO Mode Set the SIP INFO mode to send ‘*’ and ‘#’ or ‘10’ and ‘11’
Transportation Protocol Set the line to use TCP or UDP for SIP transmission
SIP Version Set the SIP version
Caller ID Header Set the Caller ID Header
Enable Strict Proxy
Enables the use of strict routing. When the phone receives packets from the
server, it will use the source IP address, not the address in via field.
Enable user=phone Sets user=phone in SIP messages.
Enable SCA Enable/Disable SCA (Shared Call Appearance )
Enable BLF List Enable/Disable BLF List
Enable DNS SRV
Set the line to use DNS SRV which will resolve the FQDN in proxy server into
a service list
Keep Alive Type
Set the line to use dummy UDP or SIP OPTION packet to keep NAT pinhole
opened
Keep Alive Interval Set the keep alive packet transmitting interval