AD1200 Installer Manual, Rev. 19.06.2013 6
www.dsp-technology.com
2.12 Entering Telephone Numbers
Up to 8 telephone numbers can be programmed, these are in locations 11 – 18. Each telephone
number should not be longer than 24 digits.
Press: PROG
1
1
Enter 1st telephone number to be dialed.
ENTER
Press:
Repeat the procedure for programming telephone numbers 2 – 8 in locations 12-18.
2.13 Programming Slow Dialing Telephone Numbers
If dialing a telephone number with a connection problem, the AD1200 can be programmed to slow
Press: PROG
Enter telephone number location
?
?
PROG
appears on the display, enter telephone number
Press:
ENTER
2.14 Recall Entered Telephone Numbers
Programmed telephone numbers can be recalled and displayed on the seven segment display.
Press: READ
PROG Enter telephone number location
?
?
2.15 Deleting A Telephone Number
Press: PROG
Enter telephone number location
ENTER
?
?
2.16 Deleting All Telephone Numbers
Press: PROG
1
9
Press:
2.17 Recording Voice Message
The voice message recoding duration is 20 seconds. The microphone is located between the Dial
& PWR LEDs. To start to record your voices message:
Press: VOICE
When releasing the voice key, LED display will show
▬
indicating you should
start speaking into the microphone. After 20 seconds the
▬
on the display
will extinguish indicating recoding has finished. To playback and listen to voice
message you have to exit installer programming and enter installer test mode.
2.18 Exit Installer Programming
Enter installer code:
?
?
?
?
ENTER
Press:
Содержание AD1200
Страница 1: ...AD1200 ...
