14
3.Screw the wall bracket to the wall using the supplied screws .
4.Mount the camera on the tripod screw and screw the camera a little way on
(about three turns).
5.Turn the camera in the desired direction and lock it with the lock nut .
6.To move the camera into its final position, undo the two pivot bolts a little,
position the camera and fix the position by tightening the two pivot bolts .
2
．
Using the Circular Tube Bracket
Components
1.Machine fixed gear
2.Fixed tightening shaft
3.Fastening screw
4.Ring hole
5.Tighten steering shaft
6.Metal screws
Install Steps
1.Lift up the tightening steering shaft (5) and open the ring hole (4).
2.Fix the bracket on the tube, turn the tightening steering shaft (5) to tight and
then press the tightening steering shaft (5) down vigorously.
3.Fix the tripod slot at the bottom of the time-lapse camera to the metal screw
(6) of the bracket.
