Assembly
L
M
N
N
G
H
H
I
J
K
O
F
4
□
Pull the excess power cord (N) through the “U-shaped” square
tube (H).
□
Slide the two long square tubes (G) into the socket assembly (F)
as shown.
□
Align the holes of the long square tubes (G) and the holes of the
socket assembly (F), and secure with Allen screws (L) using the
Allen wrench (M).
□
Insert the “U-shaped” square tube (H) into the long square
tubes (G) as shown, align the holes of the long square tubes (G)
and the holes of the “U-shaped” square tube (H), then secure
with Allen screws (L) using the Allen wrench (M).
□
Pull the excess power cord (N) through the base (I).
□
Insert the threaded tubes of the “U-shaped” square tube (H)
through the holes of the base (I). Using wrench (O) tighten
the “U-shaped” square tube (H) to the base (I) with two hex
nuts (K) and two lock washers (J).
1
Connecting the square tube to the
socket assembly
2
Connecting the “U-shaped” square
tube to the base
NOTE:
Do not twist the power cord (N).
NOTE:
Do not twist the power cord (N).
