USER MANUAL
VIDEO SERVER-MVS-14
Page:
6
Page:
6
Last updated: February 2008
DSE srl - Via Cigna 64, 10152 Turin, Italy
Tel. +39.011.850711 Fax +39.011.2472675 E-mail: Web [email protected]: www.dseitalia.it
How to change the IP address of the video
server
From the list of video servers identified by IP INSTALLER, select the video server that
you want to change
Double-click or click VIEW / PROPERTY for
to open
there
window
of
PROPERTY'.
Type the IP address chosen in the IP address box. Also set Subnet Mask, and
Gateway so that they are identical to those used by other network PC.
Click
SYNCHRONIZE
to transfer the new settings to the video server
Click
SYNCHRONIZE
to transfer the new settings to the video server
Click
SYNCHRONIZE
to transfer the new settings to the video server
Click
VIEW / OPEN WEB.
This will open an Internet Explorer browser window that will
Click
VIEW / OPEN WEB.
This will open an Internet Explorer browser window that will
Click
VIEW / OPEN WEB.
This will open an Internet Explorer browser window that will
activate the first link, as shown in the following chapter.
Other IP Installer functions
The IP Installer program also has some additional functions:
SAVE / SAVE AS
- Allow to save the list of
SAVE / SAVE AS
- Allow to save the list of
equipment detected by IP Installer in a file that you can then open the off-line even if not
connected to the network.
INSERT SERVER
- Allows
INSERT SERVER
- Allows
enter
IP parameters of the video server from scratch, without having it detected with the search
function.
DEF. USER PASSWORD -
Changing the IP parameters that is carried out by IP
DEF. USER PASSWORD -
Changing the IP parameters that is carried out by IP
Installer provides you access the video server configuration, an operation that involves the
use of the USER NAME and PASSWORD. The factory are set to the following values:
USER:
ROOT
,
PASSWORD:
PASS.
For IP INSTALLER logic also uses the factory
same ROOT / PASS values that here it is possible to modify. In the properties of each video
server (see
figure
previous one)
is
however possible to modify
individual access parameters USE CUSTOM clicking and typing them freely.
Login with Quicktime
The MVS-14 video server allows remote access via Internet Explorer and ActiveX control as
described below in detail. However, you can also access the single video display through
APPLE QUICKTIME player, downloadable
free from www.apple.com. To access the video server via quicktime choose FILE / OPEN
URL and type: RTSP: // followed by the IP address of the video server (eg RTSP:
//192.168.2.200)
Access via Quicktime is limited to the viewing of the video, but has the advantage of being
able to be used on different operating systems and various devices. The activeX access
which we will see later, you access to all of the video server functions, but it is possible only
by using Internet Explorer in Windows.