DSC TR5164-433 Скачать руководство пользователя страница 4

2

Section 1: Table of 

Contents

Section 1: Introduction .................................. 3

1.1

TR5164 Installation Procedure  ....... 3

1.2

Specifications and Features ............. 3

1.3

Compatible Wireless Devices ......... 4

1.4

Safety Instructions  ........................... 4

Section 2: TR5164 Set Up & Wiring ........... 5

2.1

Unpack the TR5164 ......................... 5

2.2

Choose a Mounting Location for the 

TR5164 ............................................. 5

2.3

Connect the TR5164 Receiver ........ 5

2.4

Tamper ............................................. 5

Section 3: Receiver Programming  ............... 6

3.1

TR5164 LEDs................................... 6

3.2

Enroll Wireless Keypad  .................. 6

3.3

Enroll Wireless Devices .................. 6

Section 4: Other Programming ..................... 8

4.1

Program Zones and Partitions ......... 8

4.2

Enable TR5164 Supervision ............8

4.3

Supervision of Wireless Zones ........9

4.4

Wireless Key Reporting ...................9

4.5

Programming Wireless Keys............9

4.6

TR5164 Software Default ..............10

Section 5: Testing & Mounting  ..................11

5.1

Wireless Device Reception Test  ...11

5.2

Mounting ........................................12

Section 6: Additional Notes ........................13

6.1

Trouble Conditions  ........................13

6.2

Wireless Zone Low Battery ...........13

Section 7: Troubleshooting .........................14

Section 8: Programming Worksheets .........15

Section 9: Français .......................................21

Section 10: Español......................................44

Section 11: Italiano.......................................66

Section 12: Nederlands ................................88
Use this manual in conjunction with the 

Installation Manual of the alarm control panel.

IMPORTANT - READ CAREFULLY: DSC Software purchased with or without Products and 

Components is copyrighted and is purchased under the following license terms:

This End-User License Agreement (“EULA”) is a legal agreement between 

You

 (the company, individual 

or entity who acquired the Software and any related Hardware) and 

Digital Security Controls, a division 

of Tyco Safety Products Canada Ltd.

 (“DSC”), the manufacturer of the integrated security systems and 

the developer of the software and any related products or components (“HARDWARE”) which You 

acquired.  

If the DSC software product (“SOFTWARE PRODUCT” or “SOFTWARE”) is intended to be 

accompanied by HARDWARE, and is NOT accompanied by new HARDWARE, You may not use, copy 

or install the SOFTWARE PRODUCT.  The SOFTWARE PRODUCT includes computer software, and 

may include associated media, printed materials, and “online” or electronic documentation.  

Any software provided along with the SOFTWARE PRODUCT that is associated with a separate end-user 

license agreement is licensed to You under the terms of that license agreement.  

By installing, copying, downloading, storing, accessing or otherwise using the SOFTWARE PRODUCT, 

You agree unconditionally to be bound by the terms of this EULA, even if this EULA is deemed to be a 

modification of any previous arrangement or contract.  If You do not agree to the terms of this EULA, 

DSC is unwilling to license the SOFTWARE PRODUCT to You, and You have no right to use it.

SOFTWARE PRODUCT LICENSE

The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as well as 

other intellectual property laws and treaties. The SOFTWARE PRODUCT is licensed, not sold. 

1.

GRANT OF LICENSE  This EULA grants You the following rights:

(a)

Software Installation and Use

 - For each license You acquire, You may have only one copy of the 

SOFTWARE PRODUCT installed.

 

(b)

Storage/Network Use

 - The SOFTWARE PRODUCT may not be installed, accessed, displayed, run, 

shared or used concurrently on or from different computers, including a workstation, terminal or other 

digital electronic device (“Device”). In other words, if You have several workstations, You will have to 

acquire a license for each workstation where the SOFTWARE will be used.

(c)

Backup Copy

 -  You may make back-up copies of the SOFTWARE PRODUCT, but You may only 

have one copy per license installed at any given time. You may use the back-up copy solely for archival 

purposes.  Except as expressly provided in this EULA, You may not otherwise make copies of the 

SOFTWARE PRODUCT, including the printed materials accompanying the SOFTWARE.

2.  DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS 

(a)

Limitations on Reverse Engineering, Decompilation and Disassembly

 - You may not reverse 

engineer, decompile, or disassemble the SOFTWARE PRODUCT, except and only to the extent that 

such activity is expressly permitted by applicable law notwithstanding this limitation.  You may not 

make any changes or modifications to the Software, without the written permission of an officer of 

DSC. You may not remove any proprietary notices, marks or labels from the Software Product. You 

shall institute reasonable measures to ensure compliance with the terms and conditions of this EULA.

(b)

Separation of Components

 -   The SOFTWARE PRODUCT is licensed as a single product. Its 

component parts may not be separated for use on more than one HARDWARE unit.

(c)

Single INTEGRATED PRODUCT

 -  If You acquired this SOFTWARE with HARDWARE, then the 

SOFTWARE PRODUCT is licensed with the HARDWARE as a single integrated product. In this case, 

the SOFTWARE PRODUCT may only be used with the HARDWARE as set forth in this EULA..

(d)

Rental

 - You may not rent, lease or lend the SOFTWARE PRODUCT. You may not make it available 

to others or post it on a server or web site.

(e)

Software Product Transfer

 - You may transfer all of Your rights under this EULA only as part of a 

permanent sale or transfer of the HARDWARE, provided You retain no copies, You transfer all of the 

SOFTWARE PRODUCT (including all component parts, the media and printed materials, any 

upgrades and this EULA), and provided the recipient agrees to the terms of this EULA. If the 

SOFTWARE PRODUCT is an upgrade, any transfer must also include all prior versions of the 

SOFTWARE PRODUCT.

(f)

Termination

 - Without prejudice to any other rights, DSC may terminate this EULA if You fail to 

comply with the terms and conditions of this EULA. In such event, You must destroy all copies of the 

SOFTWARE PRODUCT and all of its component parts.

(g)

Trademarks

 - This EULA does not grant You any rights in connection with any trademarks or service 

marks of DSC or its suppliers.

3. COPYRIGHT - 

All title and intellectual property rights in and to the SOFTWARE PRODUCT 

(including but not limited to any images, photographs, and text incorporated into the SOFTWARE 

PRODUCT), the accompanying printed materials, and any copies of the SOFTWARE PRODUCT, are 

owned by DSC or its suppliers. You may not copy the printed materials accompanying the SOFTWARE 

PRODUCT. All title and intellectual property rights in and to the content which may be accessed 

through use of the SOFTWARE PRODUCT are the property of the respective content owner and may 

be protected by applicable copyright or other intellectual property laws and treaties. This EULA grants 

You no rights to use such content. All rights not expressly granted under this EULA are reserved by 

DSC and its suppliers.

4.  EXPORT RESTRICTIONS - You agree that You will not export or re-export the SOFTWARE 

PRODUCT to any country, person, or entity subject to Canadian export restrictions. 

5.  CHOICE OF LAW

 -  This Software License Agreement is governed by the laws of the Province of Ontario, 

Canada.

6.  ARBITRATION - 

All disputes arising in connection with this Agreement shall be determined by final 

and binding arbitration in accordance with the Arbitration Act, and the parties agree to be bound by the 

arbitrator’s decision. The place of arbitration shall be Toronto, Canada, and the language of the 

arbitration shall be English.

7.  LIMITED WARRANTY

(a)   NO  WARRANTY

 - DSC PROVIDES THE SOFTWARE “AS IS” WITHOUT WARRANTY. DSC 

DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR THAT 

OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE.

(b)  CHANGES IN OPERATING ENVIRONMENT - 

 DSC shall not be responsible for problems caused by 

changes in the operating characteristics of the HARDWARE, or for problems in the interaction of the 

SOFTWARE PRODUCT with non-DSC-SOFTWARE or HARDWARE PRODUCTS.

(c) LIMITATION OF LIABILITY; WARRANTY REFLECTS ALLOCATION OF RISK

  - IN ANY 

EVENT, IF ANY STATUTE IMPLIES WARRANTIES OR CONDITIONS NOT STATED IN THIS 

LICENSE AGREEMENT, DSC’S ENTIRE LIABILITY UNDER ANY PROVISION OF THIS LICENSE 

AGREEMENT SHALL BE LIMITED TO THE GREATER OF THE AMOUNT ACTUALLY PAID BY 

YOU TO LICENSE THE SOFTWARE PRODUCT AND FIVE CANADIAN DOLLARS (CAD$5.00). 

BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF 

LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY 

NOT APPLY TO YOU.

(d) DISCLAIMER OF WARRANTIES  - 

THIS WARRANTY CONTAINS THE ENTIRE WARRANTY 

AND SHALL BE IN LIEU OF ANY AND ALL OTHER WARRANTIES, WHETHER EXPRESSED OR 

IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A 

PARTICULAR PURPOSE) AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF 

DSC.  DSC MAKES NO OTHER WARRANTIES. DSC NEITHER ASSUMES NOR AUTHORIZES ANY 

OTHER PERSON PURPORTING TO ACT ON ITS BEHALF TO MODIFY OR TO CHANGE THIS 

WARRANTY, NOR TO ASSUME FOR IT ANY OTHER WARRANTY OR LIABILITY CONCERNING 

THIS SOFTWARE PRODUCT.

(e)  EXCLUSIVE  REMEDY  AND  LIMITATION  OF  WARRANTY  

-  

UNDER NO 

CIRCUMSTANCES SHALL DSC BE LIABLE FOR ANY SPECIAL, INCIDENTAL, 

CONSEQUENTIAL OR INDIRECT DAMAGES BASED UPON BREACH OF WARRANTY, BREACH 

OF CONTRACT, NEGLIGENCE, STRICT LIABILITY, OR ANY OTHER LEGAL THEORY. SUCH 

DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF PROFITS, LOSS OF THE SOFTWARE 

PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF SUBSTITUTE OR 

REPLACEMENT EQUIPMENT, FACILITIES OR SERVICES, DOWN TIME, PURCHASERS TIME, 

THE CLAIMS OF THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY. 

WARNING: DSC recommends that the entire system be completely tested on a regular basis. 

However, despite frequent testing, and due to, but not limited to, criminal tampering or electrical 

disruption, it is possible for this SOFTWARE PRODUCT to fail to perform as expected.

DRAFT

Содержание TR5164-433
























Отзывы: