DSC PDigital Security PC1565 Скачать руководство пользователя страница 9

Страница: 9 / 56

G e t t i n g S t a r t e d : 2 . 6 S u p e r v i s i o n

3. Enter [0] for Address Assignment
4. Enter a two digit number (11-18) to specify which supervi-

sory address the keypad will occupy.

5. Press [#] twice to exit installer programming.
After assigning all keypads, perform a supervisory reset by
entering section [902] in installer’s programming. The panel
will now supervise all assigned keypads and enrolled modules
on the system.

How to Program Function Keys

By default, the 5 function keys on each keypad are pro-
grammed as Stay Arm (03), Away Arm (04), Chime (06), Sen-
sor Reset (14) and Quick Exit (16). You can change the
function of each key on every keypad:
1. Go to the keypad where you want to change the function

key programming and enter Installer Programming.

2. Press [000] for Keypad Programming.
3. Enter [1] to [5] to select a function key to program.
4. Enter the 2 digit number, [00] to [17] to select the feature

you want the function key to have. For a complete list of
Function Key options see section 3.5

“Function Keys”

page 10.

5. Continue from step 3 until all function keys are pro-

grammed.

6. To exit Installer Programming, press [#] twice.

2.6

Supervision

By default, all modules are supervised upon installation.
Supervision is enabled at all times so that the panel can indi-
cate a trouble if a module is removed from the system.
To check on which modules are currently connected and
supervised, enter programming section [903] from installer’s
programming. The LCD keypad will allow you to scroll through
the display of connected modules. A connected module
which does not show as being present will appear as a trouble
condition and the Trouble light on the keypad will turn ON.
This condition may be due to one or more of the following rea-
sons:

•

the module is not connected to the Keybus

•

there is a Keybus wiring problem

•

the module is more than 1,000'/305m from the panel

•

the module does not have enough power

For more information regarding module supervision troubles,
please refer to

“[*][2] Trouble Display”

on page 8.

2.7

Removing Modules

The panel must be instructed to no longer supervise a module
being removed from the system. To remove the module, dis-
connect it from the Keybus and reset the supervision field by
entering [902] in the installer’s programming. The panel will be
reset to recognize and supervise all existing modules on the
system.

2.8

Zone Wiring

For a complete description of the operation of all zone types,
please refer to section 5.2

“Zone Programming”

on page 13.

There are several different ways in which zones may be wired,
depending on which programming options have been
selected. The panel can be programmed to supervise nor-
mally closed, End of Line, or Double End of Line loops. Please
refer to the following diagrams to study each type of individu-
ally supervised zone wiring.

127(

$Q\]RQHSURJUDPPHGIRU)LUHRU+RXU6XSHUYLVRU\

PXVWEHZLUHGZLWKDVLQJOH(QGRI/LQH(2/UHVLVWRUUHJDUG

OHVV RI WKH W\SH RI ]RQH ZLULQJ VXSHUYLVLRQ VHOHFWHG IRU WKH

SDQHOVHFWLRQ>@>@>@6HHVHFWLRQ

“Zone Program-

ming”

RQSDJH

127(

,I\RXFKDQJHWKH]RQHVXSHUYLVLRQRSWLRQVIURP'(2/

WR(2/RUIURP1&WR'(2/VHFWLRQ>@RSWLRQV>@RU>@

\RX VKRXOG SRZHU GRZQ WKH V\VWHP FRPSOHWHO\ DQG WKHQ

SRZHULWEDFNXS,I\RXGRQRWWKH]RQHVPD\QRWZRUNFRU

UHFWO\

Normally Closed (NC) Loops

To enable normally closed loops, programming section [013],
option [1] must be ON.

127(

7KLVRSWLRQVKRXOGRQO\EHVHOHFWHGLI1RUPDOO\&ORVHG

1&GHWHFWLRQGHYLFHVRUFRQWDFWVDUHEHLQJXVHG

Single End Of Line (EOL) Resistors (5600

Ω

)

To enable panel detection of single end of line resistors, pro-
gramming section [013], options [1] and [2] must be OFF.

127(

7KLV RSWLRQ VKRXOG EH VHOHFWHG LI HLWKHU 1RUPDOO\

&ORVHG1&RU1RUPDOO\2SHQ12GHWHFWLRQGHYLFHVRUFRQ

WDFWVDUHEHLQJXVHG

Double End of Line (DEOL) Resistors

Double End of Line resistors allow the panel to determine if the
zone is in alarm, tampered or faulted.
To enable panel detection of double end of line resistors, pro-
gramming section [013], option [1] must be OFF and option
[2] must be ON.

127(

,I WKH 'RXEOH (2/ VXSHUYLVLRQ RSWLRQ LV HQDEOHG DOO

KDUGZLUH]RQHVRQWKHPDLQSDQHOPXVWEHZLUHGIRU'RXEOH

(2/UHVLVWRUVH[FHSWIRU)RXU6XSHUYLVRU\]RQHV

127(

'RQRWZLUH'(2/UHVLVWRUVRQNH\SDG]RQHV

127(

'RQRWXVH'(2/UHVLVWRUVIRU)LUH]RXU

6XSHUYLVRU\]RQHV'RQRWZLUH)LUH]RQHVWRNH\SDG]RQHWHU

PLQDOVLIWKH'(2/VXSHUYLVLRQRSWLRQLVVHOHFWHG

ANY Z

TERMINAL