manualshive.com logo in svg

DSC New Classic PC585, Руководство по установке, Страница: 28 / 52

Поделиться
Скачать
DSC New Classic PC585 Скачать руководство пользователя страница 28

24

[013]: [8] (see section 5.13 

“Bell” on page 23). The alarm out-

put will sound until a code is entered or until the bell cut-off
time expires. Communication of the signal to central station is
immediate.

If the [A] / 

 Key is pressed and held for two seconds, the

panel will sound the keypad  beeps three times to verify acti-
vation. The panel will beep the keypad ten times rapidly when
a kissoff is received, to verify communication to the central
station.

If the [P] / 

 Key is pressed and held for two seconds, the

panel will immediately communicate the signal to central sta-
tion. 
If

 [P] Key Audible Bell and Buzzer

 option is enabled, when a

user presses the [P] / 

 key, the keypad will beep three times

and the panel will activate the alarm output until an access
code is entered or the bell cut-off expires. If the option is dis-
abled, the Panic alarm will be completely silent.
Each LCD keypad may be programmed to have the [F], [A], &
[P] keys enabled or disabled. Please refer to Appendix B:
“Programming LCD Keypads” on page 45.

NOTE:The Fire, Auxiliary, Panic keys will operate even if Key-
pad Blanking is active (See 5.22

 “Keypad Blanking” 

on page

25.)

[F] Key Enable. . . . . . . . . . . . . . . . . . . . . . . Section [015]: [1] 
[P] Key Audible Bell and Buzzer . . . . . . . . . Section [015]: [2] 

5.17 Arming/Disarming Options

If the 

Quick Arm

 option is enabled, the panel can be armed

without an access code by entering [*][0] or by pressing the
Stay or Away function key. If the Quick Arm option is disabled,
users will need to enter an access code after pressing a func-
tion key.
The 

Quick Exit

 option, if enabled, will allow someone to leave

an armed premises through a Delay type zone without having
to disarm and re-arm the system. See 

 “[*][0] Quick Exit” on

page 11.
Enable the 

Arm/Disarm Bell Squawk

 option to have the

panel squawk the alarm output once upon arming and twice
upon disarming. If an alarm is in memory, when the panel is
disarmed the bell will sound three pairs of disarm squawks. 

NOTE: If you enable the Bell Squawk on Arming/Disarming
(section [014], option [1]), the bell will sound arm/disarm bell
squawks for all access codes, regardless of the programming
for attribute [7]. See 

 “[*][5] Programming Access Codes” 

on

page 10.

Enable both the 

Squawk on Away Arming/Disarming Only

and  the 

Arm/Disarm Bell Squawk

 options to have the panel

squawk the bell only when the system is away armed or dis-
armed.
The 

Opening After Alarm Keypad Ringback

 option will

cause the keypad to beep 8 times rapidly after the Opening
After Alarm reporting code has been successfully transmitted
to the central station. The 

Opening After Alarm Bell Ring-

back

 option will cause the panel to squawk the bell 8 times

rapidly after the Opening After Alarm reporting code has been
successfully transmitted to the central station.

NOTE:If the panel is armed using the Stay function key, or by 
entering [*][9][access code], there will be no bell squawks dur-
ing entry and exit delays, except for the arm/disarm bell
squawks.

Closing Confirmation

, if enabled, will cause the keypad to

beep 8 times rapidly after the closing reporting code has
been successfully transmitted to central station.
If the 

Bypass Status Displayed While Armed

 option is cho-

sen, the Bypass light will be ON while the system is armed to
indicate that there are bypassed zones.
If the 

AC/DC Inhibit Arming

 option is enabled, the panel will

not arm if there is an AC or DC (battery) trouble present on the
system. Arming will not be allowed until the AC or battery trou-
ble is cleared. If no AC or battery trouble is currently present,
when a user attempts to arm the system, the panel will do an
automatic battery test of the main panel and modules that
support a backup battery. If the battery is good, the system
will arm. If the battery is bad, the system will not arm.
If the AC/DC Inhibit Arming option is disabled, the panel will
not do an automatic battery test when arming is attempted
and the user will not be prevented from arming the system
when there is an AC or battery trouble.
If you enable the 

WLS Key Does Not Use Access Codes

option, the disarm button 

will work on wireless keys which

have not been assigned access codes. Wireless keys can
only be assigned access codes when used with PC5132 v3.0
or higher. 
To prevent disarming by wireless keys which don’t have
access codes, 

disable this option. (Please see your PC5132

manual for more information on programming wireless keys.)

NOTE: This option must be enabled when using a PC5132
v2.1 or earlier. 

Quick Arm Enable. . . . . . . . . . . . . . . . . . . . Section [015]: [4]
Quick Exit Enable . . . . . . . . . . . . . . . . . . . . Section [015]: [3]
Arm/Disarm Bell Squawk  . . . . . . . . . . . . . . Section [014]: [1]
Squawk on Away Arm/Disarm Only  . . . . . . Section [017]: [8]
Closing Confirmation  . . . . . . . . . . . . . . . . . Section [381]: [4]
Opening After Alarm Keypad Ringback . . . Section [381]: [1]
Opening After Alarm Bell Ringback . . . . . . Section [381]: [2]
Bypass Status Displayed While Armed  . . . Section [016]: [7]
AC/DC Inhibit Arming . . . . . . . . . . . . . . . . . Section [701]: [3]
Unident. Wkey Disarm Enabled  . . . . . . . . . Section [017]: [1]

5.18 Entry/Exit Delay Options

Two different 

Entry Delays

 can be programmed: the first entry

delay will be enabled for Delay 1 type zones and the second
for Delay 2 type zones. Only one 

Exit Delay

 can be pro-

grammed.

NOTE:When the panel is armed, the entry delay will follow the 
entry delay time programmed for the delay zone which is vio-
lated first.

Users can restart the exit delay by pressing the Away key
while it is counting down. The system will not log the user who
re-started the exit delay, unless the 

Quick Arming Disabled/

Function Keys Require Code

 option is turned on (section

[015], option [4]).

NOTE: If the system has been Stay armed or armed with no
entry delay ([*][9]) pressing the Away key will not start an exit
delay.

Upon arming, the panel will begin the exit delay. If the 

Audible

Exit Delay with Urgency

 option is enabled, the keypad will

beep at one second intervals until the exit delay expires. The
keypad will beep rapidly for the last 10 seconds of exit delay
to warn the user that the system is about to arm. If this option
is disabled, the keypad will not beep during the exit delay.

Содержание New Classic PC585





















































Отзывы:

Нет отзывов