background image

Escort5580TC/

VPM5580TC

X

1

X

2

RS

+V

X

2

X

1

RS

+V

RS1

RS2

CLK1

CLK2

24V(c)

24V

R

G

W1

Y1

24V(c)

24V

G

W1

Y1

Heat Stage #1

Cool Stage #1

Fan

Power - Hot

Power - Common

Heating/Cooling 

System #1

HS-EMS200 #1 

(Backplate)

X

2

X

1

RS

+V

RS1

RS2

CLK1

CLK2

24V(c)

24V

R

G

W1

Y1

24V(c)

24V

G

W1

Y1

Heat Stage #1

Cool Stage #1

Fan

Power - Hot

Power - Common

Heating/Cooling 

System #2

HS-EMS200 #2 

(Backplate)

To X2 terminal on Thermostat 3# and #4

To X1 terminal on Thermostat 3# and #4

Warning! Connect Escort/VPM RS+V to first thermostat only. Do not remove the internal jumper (shunt).

Warranty

Digital Security Controls Ltd. warrants that for a period of twelve months from
the date of purchase, the product shall be free of defects in material and workman-
ship under normal use and that in fulfilment of any breach of such warranty, Dig-
ital Security Controls Ltd. shall, at its option, repair or replace the defective
equipment upon return of the equipment to its repair depot. This warranty applies
only to defects in parts and workmanship and not to damage incurred in shipping
or handling, or damage due to causes beyond control of Digital Security Controls
Ltd. such as lightning, excessive voltage, mechanical shock, water damage, or
damage arising out of abuse, alteration or improper application of the equipment.
The foregoing warranty shall apply only to the original purchaser, and is and shall
be in lieu of any and all other warranties, whether express or implied and of all
other obligations or liabilities on the part of Digital Security Controls Ltd. This
warranty contains the entire warranty. Digital Security Controls Ltd. neither

assumes repsonsibility for, nor authorizes any other person purporting to act on its
behalf to modify or to change this warranty, nor to assume for it any other war-
ranty or liability concerning this product.
In no event shall Digital Security Controls Ltd. be liable for any direct, indirect or
consequential damages, loss of anticipated profits, loss of time or any other losses
incurred by the buyer in connection with the purchase, installation, operation or
failure of this product.

WARNING: DSC Ltd. recommends that the entire system be completely tested
on a regular basis. However, despite frequent testing, and due to but not limited
to, criminal tampering or electrical disruption, it is possible for this product to
fail to perform as expected.

FCC COMPLIANCE STATEMENT

CAUTION: Changes or modifications not expressly approved by Digital Security
Controls Ltd. could void your authority to use this equipment.

This equipment generates and uses radio frequency energy and if not installed and
used properly, in strict accordance with the manufacturer’s instructions, may cause
interference to radio and television reception. It has been type tested and found to
comply with the limits for Class B device in accordance with the specifications in
Subpart “B” of Part 15 of FCC Rules, which are designed to provide reasonable pro-
tection against such interference in any residential installation. However, there is no
guarantee that interference will not occur in a particular installation. If this equip-
ment does cause interference to television or radio reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

Re-orient the receiving antenna

Relocate the alarm control with respect to the receiver

Move the alarm control away from the receiver

Connect the alarm control into a different outlet so that alarm control and

receiver are on different circuits.

If necessary, the user should consult the dealer or an experienced radio/television
technician for additional suggestions. The user may find the following booklet pre-
pared by the FCC helpful: “How to Identify and Resolve Radio/Television Interfer-
ence Problems”. This booklet is available from the U.S. Government Printing Office,
Washington, D.C. 20402, Stock # 004-000-00345-4.

Fig 3. Wiring Diagram for Multiple Heating/Cooling Systems with Multiple HS-EMS200 Thermostats

firealarmresources.com

Содержание HS-EMS200

Страница 1: ...backplate to mark the location of two mounting holes 4 Drill two 5 mm 3 16 mounting holes at the marked locations Tap the supplied nylon anchors flush to the wall and fasten the backplate using the supplied screws Do not over tighten 5 Connect the control wires to the thermostat as shown in the appropriate wiring diagram Push any slack wire back into wall Ensure that the wires are flush with the b...

Страница 2: ...tact relay for alternate set points RS2 To Outdoor Indoor remote sensors RS1 To Outdoor Indoor remote sensors RS V To Outdoor Indoor remote sensors and to Escort5580TC VPM5580TC X2 To Escort5580TC VPM5580TC X1 To Escort5580TC VPM5580TC W1 Energizes on a call for first stage heating Y1 Energizes on a call for first stage cooling G Fan is energized with a call for heating or cooling or by pressing t...

Страница 3: ...ticipated profits loss of time or any other losses incurred by the buyer in connection with the purchase installation operation or failure of this product WARNING DSC Ltd recommends that the entire system be completely tested on a regular basis However despite frequent testing and due to but not limited to criminal tampering or electrical disruption it is possible for this product to fail to perfo...

Страница 4: ...ally when the system is operating but there is no indication of this on the display To select continuous Fan operation press the FAN button and the display will show This is recommended for electronic air cleaners and continuous ventilation requirements Outdoor ODT Button When the outdoor temperature sensor option is connected to your thermo stat you can display the current outdoor temperature by ...

Отзывы: