13
ENGLISH
Telephone Numbers
Using this table, program the Contact numbers:
1
. Click the relative box in the ‘
Number
’ column.
2
. Enter the prefix (Area Code) and Telepho-
ne number, if necessary
*
(this 20 character
field accepts digits and ‘+’ signs).
NOTE: * If local calls
DO NOT
require the
Area
Code
, enter it in the ‘
Area Code
’ field and not
in the ‘
Number field
’ (refer to ‘
Prefix
’).
Description
Using this field, program the Contact’s name.
To program a Contact name:
1
. Click the relative box (1 through 8) in the
‘
Descriptions
’ column).
2
. Enter the Name.
Area Code (Prefix)
Enter the Telephone number prefix (max. 4 di-
gits) in this field. The prefix will be included in
the Telephone number, when the GS3050-A
operates on the GSM Network.
Digit to remove
If the GS3050-A is connected downstream to
an office switchboard, the Telephone numbers
(programmed on the Security system) must be
preceded by the switchboard number (usually
one digit). As the switchboard number is not
necessary when the call is sent over the GSM
Network, it must be removed from the digits
that form the Telephone number.
Enter the switchboard number in the
Digit to
remove
field.
D
IALLER
P
AGE
This page (see Figure 9) will allow you to pro-
gram all the Dialler parameters.
Set Messages
Using this table, program the Message Descriptions.
1
. Click on the corresponding
Description
box.
2
. Enter the Message description (maximum
20 characters).
Figure 7 -
a
) Folder Management,
b
) Customer Management,
c
) Status Window
a)
b)
c)
Figure 8 - Telephone Page
firealarmresources.com
