12
©DSan Corporation
Limitimer® Rackmount User Guide
Setups
Limitimer timers and signal lights may be configured in numerous ways. The RS-485 wiring allows many
devices to be interconnected and the number is limited only by available power. Power may be
introduced anywhere but is best connected nearest the most remote lights. Wireless and network
connections may be combined with hard-wired connections. Any number of "client"-configured timers
may be connected to provide multi-point control.
These illustrations show a range of setup possibilities.
Multi-point Time Control
Note: Make sure one timer has DIP switch 1 in the UP (ON) position. The other timers should have the
switch in the OFF position.
Multi-point control can be setup over hard-wire, Bluetooth wireless or Ethernet or any combination.
This works with wireless operation as well.
