RANDOM (VACATION) MODE (DCIT-0011-DC only)
To make the program repeat daily at the same time, press the
REPEAT
button.
REPEAT ON
will display in the upper right corner of the screen and the
current timer program will repeat every day.
To cancel the daily repeat function, press the
REPEAT
button again and
REPEAT ON
will be changed to
REPEAT OFF
.
REPEAT MODE
EZ Digital Timer
Programming Guide
ITEM #DCIT-0010-DC & #DCIT-0011-DC
The Random mode changes the RUN TIME start and end times by up to +/-
30 minutes creating a more "lived in" appearance.
If
RANDOM
is turned on, the timer will start up to + or - 30 minutes from
the programmed start time and will end up to + or - 30 minutes from the
end of the programmed run time.
Example: If the RUN TIME is set to start at 6:00PM, when in RANDOM mode,
it could start as early as 5:30PM or as late as 6:30PM. The timer will turn on
at randomly selected times within this range daily until the RANDOM mode
is turned off.
If the If the RUN TIME is set to stop at 10:00PM, when in RANDOM mode, it
could stop as early as 9:30PM or as late as 10:30PM. The timer will turn off at
randomly selected times within this range daily until the RANDOM mode is
turned off.
Press the
RUN TIME
button to set how long you want the device
plugged into the timer to be on (after the delay start countdown is
over).
Each press of the button increases the run time by 1 minute. Press
and hold the button to scroll fast. Set from 1 minute (00:01) up to
24 hours (24:00).
Example:
The Run Time is set for 4 hours. When the program is
activated, the RUN TIME will count down from 4:00 down to 00:00. The
words RUN TIME will flash during the countdown.
When the timer display shows 00:00 the Run Time icon will stop
flashing and the device that is plugged into the timer will turn off.
STEP 3:
SET RUN TIME
GETTING STARTED
1 Pull the sticker off the screen
2 Plug the timer into a grounded electrical outlet for 30
minutes to charge the battery
3 After 30 minutes, remove the timer from the outlet and
move to
Step 1
STEP 2:
SET DELAY START
Press the
DELAY START
button to set when the timer will turn on.
Each press of the button increases the delay by 1 minute. Press and
hold the button to scroll fast. Set from instantly on (00:00) up to a 24
hour delay (24:00).
Example: The current time is 7:30AM. You want the device plugged
into the timer to turn on at 6:30PM. Set the "
DELAY START
" to 11:00
(eleven hours from when you program the timer).
Countdown to when the timer will start begins 5 seconds after being set.
Use the
ON/OFF
button to switch between
TIMER ON
and
TIMER OFF
modes.
TIMER ON:
when set to on, the timer will turn on/off the device
plugged into the timer as programmed.
TIMER OFF:
when set to off, the timer will not control the device
plugged into the timer and the power in the outlet will remain
constant.
Use the
ON/OFF
button to switch between
TIMER ON
and
TIMER OFF
modes.
TIMER ON:
when set to on, the timer will turn on/off the device
plugged into the timer as programmed.
TIMER OFF:
when set to off, the timer will not control the device
plugged into the timer and the power in the outlet will remain
constant.
STEP 1:
TURN TIMER ON/OFF
TIMER ON
REPEAT OFF
DELAY START
RUN TIME
DELAY START
ON/OFF
REPEAT
RUN TIME
Reset
TIMER ON
REPEAT OFF
DELAY START
RUN TIME
RANDOM DELAY START ON/OFF
REPEAT
RUN TIME
Reset
DCIT-0010-DC
DCIT-0011-DC
DCIT-0011-DC
TIMER ON
REPEAT OFF
DELAY START
RUN TIME
DELAY START ON/OFF
REPEAT RUN TIME
Reset
TIMER ON
REPEAT OFF
DELAY START
RUN TIME
RANDOM DELAY START ON/OFF
REPEAT
RUN TIME
Reset
DCIT-0010-DC
DCIT-0011-DC
TIMER ON
REPEAT OFF
DELAY START
RUN TIME
DELAY START ON/OFF
REPEAT RUN TIME
Reset
TIMER ON
REPEAT OFF
DELAY START
RUN TIME
RANDOM DELAY START ON/OFF
REPEAT
RUN TIME
Reset
DCIT-0010-DC
DCIT-0011-DC
TIMER ON
REPEAT OFF
DELAY START
RUN TIME
DELAY START ON/OFF
REPEAT RUN TIME
Reset
TIMER ON
REPEAT OFF
DELAY START
RUN TIME
RANDOM DELAY START ON/OFF
REPEAT
RUN TIME
Reset
DCIT-0010-DC
TIMER ON
REPEAT OFF
DELAY START
RUN TIME
RANDOM DELAY START ON/OFF
REPEAT
RUN TIME
Reset
RANDOM
