3
©DSan Corporation
Limitimer® Rackmount User Guide
Options: Beep – Blink
Note:
Beep and blink settings, like time settings, are set for each individual Program.
Blink on:
Red light starts to blink after it comes on at Time Remaining = 0:00.
Beep:
Audible cue is sounded when Time Remaining is 0:00 and when red phase light is illuminated. It
continues to beep every other second. See
DIP Switch Settings
to select the type of sound
.
Note:
Hold Beep button to manually trigger a single beep.
Signal Light Connections
Note: Signal lights may be purchased separately. (See Signal Lights and Accessories Page 10.)
Hardwire Connections
Signal lights connect with Cat-5 cable. (XLR cable can be used with KES-882 cable adapter. See
Accessories
.) The cable uses twisted wire pairs to carry 12 volts, differential data, and ground
reference.
Do not connect Signal Light jacks to standard network ports
. Dual RJ45 jacks are available on
the rear panel (G) and one on the front panel (H) for signal light connections.
Multiple signal lights can be interconnected via daisy chain or through a power booster hub (PSL-PB6 or
PSL-PB18. See
Accessories
).
.
