32
3. Turn the food container clockwise until the arrow
(on the container) points to the
opened lock
(on the base unit). You can now remove the food container from the
base unit.
4. Select the required insert (see the chapter "Accessories").
5. Place the required foodstuff and spices into the food container and/or strainer basket.
Observe the maximum
fi
lling quantity (
MAX
marking in the food container)! If you use
the strainer basket, place it in the food container.
6. Insert the food container into the base unit so that the arrow
(on the container)
points to the opened lock
(on the base unit). Turn the food container counter
clockwise until the arrow
(on the container) points to the closed lock (on the
base unit).
7. Now place the lid on the food container so that the latches
of the lid latch into the notches at the top of the food con-
tainer (see diagram). Close the lid. The lid must latch in
audibly. Turn the lid locking lever clockwise by 90°.
Preparation
• During preparation you can remove the lid at any time, e. g. to place more
food in the food container. Whenever the lid locking lever on the base unit
is opened, the motor and the preparation time are stopped and the cooking
temperature is switched off. The displays shows the symbol
. When the
lid has been replaced on the appliance and the lid locking lever on the base
unit is in the correct position, the symbol disappears. Now press the
Start/
Stop
button. The appliance restarts. The preparation time counts down from
the time when the appliance was previously switched off.
• If you want to add small amounts of food or spices etc. to the food container
during preparation, you can just remove the measuring cup from the lid instead
of the entire lid, and add the required foodstuff through this opening in the lid.
• Preparation can be interrupted manually at any time by pressing the
Start/
Stop
button.
• The appliance is furnished with overload protection. In case of overload, the
appliance switches off automatically. The red indicator lamp (
ÜBERLASTUNG
= overload) lights up and the appliance beeps. In this case pull the plug out
of the plug socket and wait for 15 minutes before using the appliance again.
Setting time, temperature and speed manually
1. Connect the device to a properly installed, easily accessible socket and set the On/
Off switch to position I. 00 : 00 will appear on the top line of the display (display in-
dicating the cooking time) and 0 for the speci
fi
cation of the cooking time or 0 for the
speci
fi
cation of the motor speed in the lines below.