Dryflow DF35DM, Инструкция по эксплуатации и каталог запасных частей, Страница: 5 / 13

Installation
3
1.Drill a hole (size:35mm/ 1.37") on the basin.
Installation location to be decided by the
site owner. 2.The center of the mounting hole to the
edge of the basin and to the edge of the
wall
(1.18-1.57 ) should be at least 30-40mm " .
Otherwise the mounting nut would not fit.
35mm
(1.37 ) "
3. Mounting steps of the spout:
A. Insert the shaft of the spout through the
hole on the basin.
B. Thread in the rubber pad, the stainless
steel washer, and the plastic mounting nut.
C. Fasten with the hex tool.
A
Center point
Mounting hole
Recommended Deck Thickness:10-30mm(0.39-1.18 ) "
4.Remove two screws from the cover.
A ≧ 30-40mm
" (1.18-1.57 )
A
Washer
Pad
Nut