Dryco Pool Cover
Drain Kit
Important
When connecting drain hose to inlet in step 3 of the installation instructions for pool cover, it is
extremely important that the hose does not have any loops or kinks in it as shown below in
figure 1.
You must loosen the union, and twist the pipe to work the loops and kinks out. While the union
is loose let the water fill the pipe. This will allow the pipe to sink towards the bottom of the
pool. When finished the pipe should hang straight as shown in figure 2.
Be sure to tighten the union completely when done.
Failure to do this will result in a leak and pool water will drain out of the pool.
Figure 1 – Wrong
Figure 2 - Right