Drucker Diagnostics DASH COAG, Руководство оператора

Страница: 9 / 16

Drucker Diagnostics – Customer Service: +1-814-692-7661 – CustomerService@DruckerDiagnostics.com | Page 3
Q
UICK
S
TART
The LED indicator light is on for the cycle currently selected:
2 min This setting is factory preset for 2 minutes at 6,600 RPM/4,400 xg
3 min This setting is factory preset for 3 minutes at 6,600 RPM/4,400 xg
5 min This setting is factory preset for 5 minutes at 5,200 RPM/2,700 xg
Start
Begins running the cycle indicated by the cycle indicator LED light.
The lid must be closed.
Unlock
Allows access into the rotor chamber by disengaging the locking
mechanism. Entry is only possible when the rotor is stopped.
Stop
Pressing the UNLOCK button during operation will terminate the run
and unlock the lid after the rotor has come to a stop.
Cycle Selection
The LED light is on for the cycle currently selected. To change the
selected cycle, press the UNLOCK button in succession until the
desired cycle is selected. Two seconds after selection, the button
reverts to its UNLOCK function.
Lock Cycle Selection
Select desired cycle. Press and hold the UNLOCK button for 5
seconds. Two beeps will confirm that cycle selection is locked.
Unlock Cycle Selection
To re-enable cycle selection, press and hold the UNLOCK button for
5 seconds. Three beeps will confirm that cycle selection is now
unlocked.